Lynx Rave 600 ACE 2017 Operator's Manual page 52

CONTROLS/INSTRUMENTS/EQUIPMENT
3) Digital Display
mmo2013-004-041_b
1. Digital display
The multifunction display is used to:
– Display the WELCOME message
on power up
– Display the KEY recognition mes-
sage
– Provide various indications as se-
lected by the operator
– Activating or changing various func-
tions or modes of operation
– Display scrolling messages of func-
tion activation or system faults
– Display fault codes.
WARNING
Never adjust or set functions on
the multifunction gauge while rid-
ing the vehicle.
4) Pilot Lamps and Messages
mmo2013-004-042_a
TYPICAL — PILOT LAMPS
See table below for usual pilot lamps
information. Refer to
SYSTEM
for details on malfunction pi-
lot lamps.
______________
50
MONITORING