Lynx Rave 600 ACE 2017 Operator's Manual page 107

Front Shock Absorber
Front Shock Compression Damping
NOTE: Both low and high speed com-
pression damping are adjusted simul-
taneously.
Low speed compression damping con-
trols how the shock absorber reacts to
a low suspension velocity (slow com-
pression strokes, in most cases when
riding at lower speeds).
High speed compression damping
controls how the shock absorber re-
acts to a high suspension velocity
(quick compression strokes, in most
cases when riding at higher speeds).
ACTION
Increasing
compression
damping force
Decreasing
compression
damping force
To adjust, turn clockwise to increase
compression damping force and coun-
terclockwise to decrease compression
damping force.
fmo2012-003-039_c
1. Compression damping adjuster knob
RESULT
Firmer
compression
damping
Softer
compression
damping
______________
Shock Rebound Damping
KYB 40 PB HLCR
Rebound damping controls how the
shock absorber restrains the exten-
sion stroke.
Turn the damping adjuster accordingly.
Turning it clockwise increases shock
damping action (stiffer).
ACTION
Increasing
rebound damping
force
Decreasing
rebound damping
force
NOTE: In repetitive short small bumps
(ripple), it is recommended to use a
lower rebound damping setting.
fmo2012-003-041_c
1. Rebound adjuster (knob or slot)
TUNE YOUR RIDE
RESULT
Firmer rebound
damping
(extension stroke)
Softer rebound
damping
(extension stroke)
105