Lynx Rave 600 ACE 2017 Operator's Manual page 58

CONTROLS/INSTRUMENTS/EQUIPMENT
PILOT
LAMP(S) BEEPER
ON
Long
beeps
repeating
slowly
3 short
beeps
—
— —
—
—
SPORT
—
MODE
5) MODE (M) Button
Button use to navigate in gauge multifunction display.
NOTE: MODE (M) button on the multi- switch housing has the same functions and
can also be used.
6) SET (S) Button
Button used to navigate, adjust or reset gauge multifunction display.
In order to memorize settings, engine must be running.
NOTE: SET (S) button on the multifunction switch has the same functions and can
also be used.
______________
56
MESSAGE
DISPLAY
REVERSE Reverse is selected.
REV. FAIL Reverse did not engage, try again.
—
High beam headlights are selected.
E-TEC: Engine and/or injection oil need
to
The engine's RPM is limited until desired
WARM UP
temperature is reached (up to 10 minutes when
driving). Warm-up period may occur after a
restart in very cold weather..
ACE
—
ECO mode is selected.
—
Standard mode is selected.
—
Sport mode is selected.
DESCRIPTION
warm-up before normal operation.