Lynx Rave 600 ACE 2017 Operator's Manual page 113

FIRST INSPECTION (2-STROKE) AFTER THE FIRST 500 KM (300 MI) OR
10 HOURS OF OPERATION, WHICHEVER COMES FIRST
Inspect front suspension
Inspect rear suspension (including stopper straps and slider shoes)
SUSPENSION
Lubricate front and rear suspension
Retighten PPS2 rear axle bolt 1/4 turn.
Adjust seat lock plate (only REX2 models)
BODY
FIRST INSPECTION (4-STROKE) AFTER THE FIRST 500 KM (300 MI) OR
10 HOURS OF OPERATION, WHICHEVER COMES FIRST
Inspect engine seals and gaskets for leaks
Inspect exhaust system and check for leaks
ENGINE
Check coolant level
FUEL
Inspect fuel lines and connections
SYSTEM
Inspect drive belt
Visually inspect drive pulley
Tighten drive pulley retaining screw to specified torque
Inspect driven pulley
DRIVE
Check driven pulley preload
SYSTEM AND
Adjust and align track
BRAKE
Change chaincase / gearbox oil
Adjust drive chain (Not for models equipped with gearbox)
Check brake fluid level
Inspect brake hose, pads and disk
Inspect steering mechanism
STEERING
SYSTEM
Inspect skis and runners
Tighten frame pyramid rod screws to 14 N•m (124 lbf•in)
FRAME
Retigthen rear member screws to frame to specified torque (REX2
35 N•m (26 lbf•ft))
______________
FIRST INSPECTION
111