Lynx Rave 600 ACE 2017 Operator's Manual page 17

After Engine Is Started
For proper engine starting proce-
dure, refer to the appropriate
STARTING PROCEDURE
1. Check headlights high beam and
low beam, taillight, stop light and
pilot lamps operation.
NOTE: You may need to detach tether
cord from your clothes to check lights.
In such a case, attach cord as soon
as you get back at the controls of the
snowmobile.
Pre-Ride Check List
ITEM
BODY INCLUDING SEAT,
FOOTRESTS, LIGHTS, AIR
FILTER, CONTROLS AND
INSTRUMENTS
SKIS AND STEERING ACTION Check for free movement and proper operation.
FUEL AND INJECTION OIL (IF
APPLICABLE)
COOLANT
BRAKE FLUID
STORAGE COMPARTMENT
TRACK
THROTTLE LEVER
BRAKE LEVER
PARKING BRAKE, BRAKE
EMERGENCY ENGINE STOP
SWITCH AND ENGINE
CUT-OFF SWITCH (TETHER
CORD CAP)
LIGHTS
SKI RUNNERS
SLIDER SHOES
DRIVE BELT
________
ENGINE
section.
Check condition and remove snow or ice.
Check for proper level and no leaks.
Check for proper level and no leaks.
Check for proper level and no leaks.
Check for proper latching and no heavy or
breakable objects.
Check condition and remove snow or ice.
For studded tracks, see
TRACTION ENHANCING PRODUCTS
Check for proper operation.
Check for proper operation.
Check for proper operation.
Check for proper action. Tether cord must be
attached to operator clothing eyelet.
Check for proper operation.
Check for proper operation.
Check for proper operation.
Check for cracks, fraying or abnormal wear.
SAFETY INFORMATION
2. Check the engine cut-off switch (by
pulling tether cord cap) and emer-
gency engine stop switch opera-
tion.
3. Release parking brake.
WARM UP
4. Refer to the
follow instructions.
OPERATION
INSPECTION
________
RIDING THE VEHICLE
section and
✔
in the
subsection.
15