Advanced; Info - Nuvico EV2-400 Instruction Manual

5. Using direction button to move [Start] button then press [+] button to start update
While it's updating, "in progress" message is displayed.
6. After the update process is complete, "Success" message is displayed. Press [+] button to
restart. The DVR issues a single beep.
NOTE1: Do not switch OFF or PRESS any key during the update process.
NOTE2. Please consult with your installer or seller before update DVR.

8.5. ADVANCED

ADVANCED contains brief system setting, FACTORY DEFAULT to reset setting as initial
except IP setup, LANGUAGE and VIDEO MODE.

8.6. INFO

System information contains brief model information, Mac address and installed HDD status.
Select Info menu on Main Menu by the remote control or mouse. The system information is
displayed. Use the Direction button to move next page.
63 EV2 Series DVR