Hardware Reference; Panel Guide; Ethernet Port; Led Indicators - Moxa Technologies ioLogik E1210 User Manual

ioLogik E1200 Series

Hardware Reference

Panel Guide

NOTE The RESET button restarts the server and resets all settings to factory defaults. Use a pointed object such as
a straightened paper clip to hold down the RESET button for 5 seconds. The factory defaults will be loaded once
the READY LED turns green again. You may then release the RESET button.

Ethernet Port

LED Indicators

LED
Power
Ready
Port 1
Port 2
EXT
Pin
Signal
Pin
Signal
State Description
Amber System power is ON
OFF System power is OFF
Green System is ready
Flashing Flashes every 1 second when the "Locate" function is triggered
Flashing Flashes every 0.5 second when the firmware is being upgraded
Flashing ON/OFF cycle period of 0.5 second represents "Safe Mode"
OFF System is not ready
Green Ethernet connection enabled
Flashing Transmitting or receiving data
Green Ethernet connection enabled
Flashing Transmitting or receiving data
Green EXT field power input is connected
Off EXT field power input is disconnected
1 2
TXD+ TXD-
5 6
--- RXD-
1-14
Introduction
3 4
RXD+ ---
7 8
--- ---