Activation Process For The Ethernet/Ip Function - Moxa Technologies ioLogik E1210 User Manual

Activation Process for the EtherNet/IP
5.
The ioLogik E1200 series supports the EtherNet/IP protocol once the device has been registered and activated.
In this note, we will explain how to activate the EtherNet/IP function in the ioLogik E1200 series. The
EtherNet/IP function can only be activated after the following firmware and utility versions are up-to-date.
• ioLogik E1210 V2.5 (std. version)
• ioLogik E1211 V2.4 (std. version)
• ioLogik E1212 V2.5 (std. version)
• ioLogik E1213 V2.6 (std. version)
• ioLogik E1214 V2.5 (std. version)
• ioLogik E1240 V2.4 (std. version)
• ioLogik E1241 V2.5 (std. version)
• ioLogik E1242 V2.5 (std. version)
• ioLogik E1260 V2.5 (std. version)
• ioLogik E1262 V2.5 (std. version)
• ioSearch V1.15 (std. version)
Take the following steps to activate the EtherNet/IP function:
Step 1: Assign the license file folder
After installing ioSearch V1.15, the user should assign a folder to place the license file in.
Click System  Options to find the window displayed below. Next, click the settings icon
(shown at the right) to assign the license folder. Click OK to complete the settings.
5
Function
Settings Icon