Iologik E1240; Iologik E1241 - Moxa Technologies ioLogik E1210 User Manual

ioLogik E1200 Series

ioLogik E1240

Inputs and Outputs
Analog Inputs: 8 channels
Isolation: 3k VDC or 2k Vrms
Analog Input
Type: Differential input
Resolution: 16 bits
I/O Mode: Voltage / Current (jumper selectable)
Input Range: 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA (burnout detection)
Accuracy:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C
Sampling Rate:
• All channels: 12 samples/sec
• Per channel: 1.5 samples/sec
• Only one channel enabled: 12 samples/sec
Input Impedance: 10 mega-ohms (min.)
Built-in Resistor for Current Input: 120 ohms
Power Requirements
Input Voltage: 12 to 36 VDC
Input Current: 121 mA @ 24 VDC
MTBF (mean time between failures)
Time: 474,053 hrs
Standard: Telcordia SR332

ioLogik E1241

Inputs and Outputs
Analog Outputs: 4 channels
Isolation: 3k VDC or 2k Vrms
Analog Output
Resolution: 12 bits
Output Range: 0 to 10 VDC, 4 to 20 mA
Drive Voltage: 10 mA (max.)
Accuracy:
±0.1% FSR @ 25°C
±0.3% FSR @ -40 and 75°C
Load Resistor: Internal register, 400 ohms
Note: 24 V of external power required when loading exceeds 1000 ohms.
Power Requirements
Input Voltage: 12 to 36 VDC
Input Current: 194 mA @ 24 VDC
MTBF (mean time between failures)
Time: 888,656 hrs
Standard: Telcordia SR332
1-9
Introduction