Iologik E1213 - Moxa Technologies ioLogik E1210 User Manual

ioLogik E1200 Series

ioLogik E1213

Inputs and Outputs
Digital Inputs: 8 channels
Digital Outputs: 4 channels
Configurable DIOs (by jumper): 4 channels
Isolation: 3k VDC or 2k Vrms
Digital Input
Sensor Type: Wet Contact (NPN or PNP), Dry Contact
I/O Mode: DI or Event Counter
Dry Contact:
• On: short to GND
• Off: open
Wet Contact (DI to COM):
• On: 10 to 30 VDC
• Off: 0 to 3 VDC
Common Type: 12 points per COM
Counter Frequency: 250 Hz
Digital Filtering Time Interval: Software configurable
Digital Output
Type: Source
I/O Mode: DO or Pulse Output
Pulse Output Frequency: 500 Hz
Over-Voltage Protection: 41 VDC
Over-current Protection: 1.5 A per channel @ 25°C
Over-Temperature Shutdown: 175°C (typical), 150°C (min.)
Current Rating: 500 mA per channel
Power Requirements
Output Voltage Rating: 15 to 30 VDC (12 or 9 VDC configurable by jumper on the 4 DO channels)
Input Voltage: 12 to 36 VDC
Input Current: 130 mA @ 24 VDC
MTBF (mean time between failures)
Time: 715,256 hrs
Standard: Telcordia SR332
1-7
Introduction