Restful Api Setting; Ethernet/Ip Setting - Moxa Technologies ioLogik E1210 User Manual

ioLogik E1200 Series
To allow access for hosts on a specific subnet
Enter 0 as the last digit in both the IP Address field and Netmask field (e.g., 192.168.1.0 and
255.255.255.0).
To allow unrestricted access
Deselect the Enable the accessible IP list option.
Refer to the following table for additional configuration examples.
Allowed Hosts
Any host
192.168.1.120
192.168.1.1 to 192.168.1.254
192.168.0.1 to 192.168.255.254
192.168.1.1 to 192.168.1.126
192.168.1.129 to 192.168.1.254

RESTful API Setting

The ioLogik E1200 supports RESTful API. To enable this API, select the Enable Restful AP checkbox.

EtherNet/IP Setting

The ioLogik E1200 supports the EtherNet/IP protocol. To enable the protocol, select the Enable EthernetIP
Protocol checkbox.
NOTE The EtherNet/IP function needs to be activated before it can be used. See Chapter 5 for details.
IP Address/Netmask
Disable
192.168.1.120 / 255.255.255.255
192.168.1.0 / 255.255.255.0
192.168.0.0 / 255.255.0.0
192.168.1.0 / 255.255.255.128
192.168.1.128 / 255.255.255.128
3-26
Using the Web Console