Entering Characters
You can enter characters and digits using the dialing keys.
You can select one of the character modes by pressing the Right Soft Key while entering a name. The
function icon above the soft key displays the current character mode.
For available characters, see "Character Mode Table", Page 56.
To change the character mode while editing a name in the Phonebook, press the Right Soft Key.
Model No.
KX-HDV130, KX-HDV130C
KX-HDV130NE, KX-HDV130X, KX-HDV130SX
KX-HDV130RU
Example: To enter "Anne" in Latin Mode.
2 a [E] a * a 6 a 6 a [E] a 6 a 6 a [E] a 3 a 3
R To switch between uppercase and lowercase, press *.
R To enter a character located on the same dialing key as the previous character, move the cursor by
pressing the Navigator Key E, then enter the desired character.
R If you enter a different character by mistake, press the Navigator Key [F] or [E] to highlight the
character, press
Clear
R To clear an entire line, press
R To move the cursor, press the Navigator Key [F], [E], [D] or [C].
to delete it, then enter the correct character.
for more than 1 second.
Clear
Before Operating the Telephones
Character Mode Transition
(Latin)
¯
(Numeric)
¯
(Extended 1)
(Latin)
¯
(Numeric)
¯
(Greek)
¯
(Extended 1)
¯
(Extended 2)
(Cyrillic)
¯
(Numeric)
¯
(Latin)
¯
(Extended 1)
¯
(Extended 2)
25