Adjusting The Volume; Entering Characters - Panasonic KX-HDV130 Operating Instructions Manual

2.8.2 Adjusting the Volume

Adjusting the Receiver/Speaker/Headset Volume
1.
Press the [ ] or [ ] volume key to adjust the volume during a conversation.
Note
•
Both receiver volume and headset volume are adjusted in training mode. See "3.4.9 Using Training
Mode (KX-HDV230 only) ".
Adjusting the Ringer Volume or Turning the Ringer Off
1.
In standby mode, press the [ ] or [ ] volume key to adjust the ringer volume.
Adjusting the Ringer Volume or Turning the Ringer Off while Ringing
While receiving a call, do the following to adjust the ringer volume or turn the ringer off.
Note
•
If you attach a headset while receiving an incoming call, ringing will be heard from the speaker.
To adjust the ringer volume
1.
Press the [ ] or [ ] volume key to adjust the ringer volume.
Note
•
The adjusted volume level will also be used for subsequent calls.
2.
Press to exit.
Back
To turn the ringer off
1.
Press .

2.8.3 Entering Characters

You can enter characters and digits using the dialing keys.
You can select one of the character modes by pressing the Right Soft Key while entering a name. The
function icon above the soft key displays the current character mode.
To change the character mode while editing a name in the Phonebook, press the Right Soft Key.
For available characters, see "5.1 Character Mode Table".
Suffix: [none] / C
(Latin)
ABC
↓
(Numeric)
0 - 9
↓
(Extended 1)
Document Version: 2017-08
Suffix: NE / X / SX
(Latin)
ABC
↓
(Numeric)
0 - 9
↓
(Greek)
↓
(Extended 1)
↓
(Extended 2)
2.8.2 Adjusting the Volume
Suffix: RU
(Cyrillic)
↓
(Numeric)
0 - 9
↓
(Latin)
ABC
↓
(Extended 1)
↓
(Extended 2)
Operating Instructions 45