Alarm Log; Trip Log; Event Log; Counters - Danfoss mcd-500 Operating Instruction

8 Tools

8.9 Alarm Log

The Alarm Log button opens the Alarm Logs, which contains a Trip Log, Event Log, and Counters which store information on the MCD 500's operating
history.

8.9.1 Trip Log

The Trip Log stores details of the eight most recent trips, including the date and time the trip happened. Trip 1 is the most recent and trip 8 is the oldest
stored trip.
To open the Trip Log:
1. Open the Alarm Logs.
2. Scroll to Trip Log and press OK.
▲ ▼
3.
Use the and
To close the log and return to the main display, press BACK.

8.9.2 Event Log

The Event Log stores time-stamped details of the starter's 99 most recent events (actions, warnings and trips), including the date and time of the event.
8
Event 1 is the most recent and event 99 is the oldest stored event.
To open the Event Log:
1. Open the Alarm Logs.
2. Scroll to Event Log and press OK.
▲ ▼
3.
Use the and
To close the log and return to the main display, press BACK.

8.9.3 Counters

NB!
This function is protected by the security access code.
The performance counters store statistics on the starter's operation:
• Hours run (lifetime and since counter last reset)
• Number of starts (lifetime and since counter last reset)
• Motor kWh (lifetime and since counter last reset)
• Number of times the thermal model has been reset
The resettable counters (hours run, starts and motor kWh) can only be reset if the correct access code is entered.
80
buttons to select a trip to view, and press OK to display details.
buttons to select an event to view, and press OK to display details.
MG.17.K2.02 - VLT ® is a registered Danfoss trademark
MCD 500 Operating Instruction