Safety Notice; Introduction; Certification; Scope Of Manual - Beckman Coulter Avanti J-26S XP Instructions For Use Manual

Certification

Beckman Coulter Avanti J-26S XP centrifuges are manufactured in a facility that maintains
certifications to both ISO 9001:2008 and ISO 13485:2003. They have been designed and tested to be
compliant (when used with Beckman Coulter rotors) with the laboratory equipment requirements
of applicable regulatory agencies. Declarations of conformity and certificates of compliance are
available at www.beckmancoulter.com.

Scope of Manual

This manual is designed to familiarize centrifuge users and site engineers with the Avanti J-26S XP
centrifuge, its functions, specifications, operation, and routine care and maintenance.
Beckman Coulter recommends that you read this entire manual, especially the
all safety-related information, before operating the instrument or performing instrument
maintenance.
CHAPTER 1, Description
•
description of system controls and indicators, and system specifications.
CHAPTER 2, Operation
•
CHAPTER 3, Troubleshooting
•
and user-performed corrective actions.
CHAPTER 4, Care and Maintenance
•
brief list of supplies and replacement parts.
APPENDIX A, Preinstallation Requirements
•
centrifuge installation.
• APPENDIX B, Temperature Calibration Procedure
control within ±1°C is required.
NOTE
If the centrifuge is used in a manner other than specified in this manual, the safety and performance
of this equipment could be impaired. Further, the use of any equipment other than that recommended
by Beckman Coulter has not been evaluated for safety. Use of any equipment not specifically
recommended in this manual is the sole responsibility of the user.
PN B10087AB
contains an overall description of the centrifuge, including a
summarizes procedures for operating the centrifuge.
lists system diagnostic messages, together with probable causes
contains procedures for routine maintenance, as well as a
contains instructions for preparing your site for
contains a procedure to use when temperature

Introduction

and

Safety Notice

xiii