Partlow MIC 8200 Installation And Operation Manual page 75

Output Specifications
CONTROL OUTPUT 1 AND 2
Relay Output SPST
115 VAC: 5.0 A Resistive; 1/8HP or 250 VA
230 VAC: 2.5 A Resistive; 1/8HP or 250 VA
SSR Driver Open collector output
Short circuit protected at 100 mA maximum
Provides 4 VDC at 20 mA or 3 VDC at 40 mA
Current Output 0-20mADC or 4-20 mADC into 650 ohms maximum.
ALARM OUTPUT
Relay Output SPST
115 VAC: 5.0 A Resistive; 1/8HP or 250 VA
230 VAC: 2.5 A Resistive; 1/8HP or 250 VA
SSR Driver Open collector output
Short circuit protected at 100 mA maximum
Provides 4 VDC at 20 mA or 3 VDC at 40 mA
Display Specifications
Upper Digital Display
Lower Digital Display
Status Indicators
Alarm Adjustment Specifications
Process Alarm
Deviation Alarm
Deviation Band Alarm
Control Adjustments Specifications
On/Off Hysteresis
Proportional Band
Manual Reset
Auto Reset
Rate
Cycle Time
Position Proportioning Sensitivity
First Output Position
Second Output Position
Four (4) 7 segment LED's each; .36 inches high
Four (4) 7 segment LED's each; 36 inches high
Individual LED indicators for Remote Setpoint, Setpoint 1,
Setpoint 2, Process Value,Out 1, Out 2, Manual, Alarm,
Degrees F, Degrees C, or Engineering Units, minus sign
for negative values (one for each display), Percentage of
Output 1, and Percentage of Output 2.
-9999 to 9999 units
-3000 to 3000 units
1 to 3000 units
0 to 300 units
1 to 3000 units
-1500 to 1500 units
0.0 to 100.0 repeats/minute
0.0 to 10.0 minutes
1 to 240 seconds
0.0 to 50.0 %
-1000 to 1000 units
-1000 to 1000 units
P 75
AGE