Proportional Bandwidth Effect On Output - Partlow MIC 8200 Installation And Operation Manual

P 42
AGE
(Continued from page 41)
A Position Proportioning sensitivity adjustment is provided, which specifies a deadband
around the setpoint to prevent the valve from oscillating. The valve rotation time must be
entered, for proper operation, into the Tune mode paramter Ct1.
See Figure 4-1 for proportional bandwidth effect on the output.
FIGURE 4-1

Proportional Bandwidth Effect On Output

100%
Output
Action
0%
100
100%
Output
Action
0%
The Proportional Bandwidth is the area where the output is a percentage of the full output.
The size of the proportional band determines what change in the output will result from a
change in the process variable. In the upper figure when the process variable is at 125 the
output will be at 75% of full output. In the lower figure the proportional bandwidth is smaller.
When the process variable is at 125 the output is now at 100%. The larger the proportional
band the smaller the "gain" and vice versa.
PB=100
150
Setpoint
PB=50
125 150
Setpoint
200
Process
Variable
175