Partlow MIC 8200 Installation And Operation Manual page 2

P 2
AGE
NOTE
I
nformation in this installation, wiring, and operation
manual is subject to change without notice. One
manual is provided with each instrument at the time of
shipment. Extra copies are available at the price
published on the front cover.
Copyright © July 1993, all rights reserved. No part of this
publication may be reproduced, transmitted, transcribed or
stored in aretrieval system, or translated into any language
in any form by any means without the written permission
of the factory.
This is the Fourth Edition of the manual. It was written and
produced entirely on a desk-top-publishing system. Disk
versions are available by written request to the factory -
Advertising and Publications Department.
We are glad you decided to open this manual. It is
written so that you can take full advantage of the features of
your new dual display process controller.
It is strongly recommended that factory equipped applications incorporate
a high or low limit protective device which will shut down the equipment
at a preset process condition in order to preclude possible damage to
property or products.