Partlow MIC 8200 Installation And Operation Manual page 47

P 47
AGE
4.1.2 OUTPUT ACTION ON ERROR CONDITION
If the instrument displays a sensor problem code Hi, Lo or Snsr or any of the error codes
1-36, the On/Off Output(s) Control and Alarm will go off. The Proportional Control Outputs
will go to a user selectable output % (P1EC, P2DC in the Program mode). The Process
Re-transmission proportional output will go to 0%. Proportional control can be adjusted in
the event of an error condition in the Manual mode. On/Off relays can be activated
individually in the Test mode (Test 6).