Partlow MIC 8200 Installation And Operation Manual page 33

STEP DESCRIPION
40 Auto Tune
Deviation
Upper Limit
40 Auto Tune
Deviation
Lower Limit
40 Auto Tune Setpoint ASuL
Upper Limit
41 Auto Tune Setpoint ASLL
Lower Limit
42 Control Response CrC
Criteria
43 Control Algorithm
44 Auto Tune
Abort Option
45 Auto Tune
Time Limit
46 Auto Tune Select
Option for On Demand
* Whenever inPS is changed, the parameter is set to the upper limit of advertised
specifications section (Appendix D, page 74)
DISPLAY AVAILABLE
CODE SETTINGS
AduL 0° to 1000°
AdLL 0 to 5000°
0 = no lower limit
-9999° to 9999°
-9999° to 9999°
1.0 to 2.0
1.0 = 1/4 Amplitude Decay
2.0 = Damped Response
CAC 1 = PID
2 = PI
3 = P
AAo 0 = Go into Standby at
1 = Go into Standby at
2 = Go into Control with last
3 = Go into control with PID
parameters of ArS1 = 0,
rt1 = 0 and
a) if dPoS = 0, Pb1 = 100
b) if dPoS = 1, Pb1 = 10
AtL 0 = No Limit
1 to 500 minutes
ASo 0 = On demand not selected 0
1 = On demand selected
FACTORY YOUR
SETTING
0
0
1400*
0
2.0
Response
2
0
0% output
o1LL % output
PID parameters
0
span as indicated in the
SETTING
P 33
AGE