Warranty - Partlow MIC 8200 Installation And Operation Manual

Warranty and Return Statement
These products are sold by the factory under the warranties set forth in the following
paragraphs. Such warranties are extended only with respect to a purchase of these
products, as new merchandise, directly from the factory or from a factory distributor,
representative or reseller, and are extended only to the first buyer thereof who purchases
them other than for the purpose of resale.

Warranty

These products are warranted to be free from functional defects in materials and work-
manship at the time the products leave the factory and to conform at that time to the
specifications set forth in the relevant instruction manual or manuals, sheet or sheets, for
such products for a period of three years.
THERE ARE NO EXPRESSED OR IMPLIED WARRANTIES WHICH EXTEND BEYOND
THE WARRANTIES HEREIN AND ABOVE SET FORTH. THE FACTORY MAKES NO
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
WITH RESPECT TO THE PRODUCTS.
Limitations
The factory shall not be liable for any incidental damages, consequential damages, special
damages, or any other damages, costs or expenses excepting only the cost or expense of
repair or replacement as described above.
Products must be installed and maintained in accordance with the instructions. Users are
responsible for the suitability of the products to their application. There is no warranty
against damage resulting from corrosion, misapplication, improper specifications or other
operating condition beyond our control. Claims against carriers for damage in transit must
be filed by the buyer.
This warranty is void if the purchaser uses non-factory approved replacement parts and
supplies or if the purchaser attempts to repair the product themselves or through a third
party without factory authorization.
Returns
The factory's sole and exclusive obligation and buyer's sole and exclusive remedy under
the above warranty is limited to repairing or replacing (at factory's option), free of charge,
the products which are reported in writing to the factory at its main office indicated below.
The factory is to be advised of return requests during normal business hours and such
returns are to include a statement of the observed deficiency. The buyer shall pre-pay
shipping charges for products returned and the factory or its representative shall pay for
the return of the products to the buyer.
Approved returns should be sent to: 2 CAMPION ROAD
NEW HARTFORD, NY 13413 USA