Mercedes-Benz B-Class F-CELL Operator's Manual page 90

245_AKB; 1; 73, en-US
d2ureepe,
COMAND navigation system (Introduction)
88
personal data, among other things, (e.g.
station memory, address book entries,
entries in the destination memory and in
the last destinations of the navigation
system). It is recommended that you
perform a reset before the vehicle is
handed over or sold, for example.
X
Select System£Settings£Reset.
You will be prompted to confirm that you
wish to perform the reset.
X
Select Yes or No.
If you select Yes, you will again be
prompted to confirm that you wish to
perform the reset.
X
Select Yes or No.
If you select Yes, COMAND is reset and
restarted.
COMAND navigation system
(Introduction)
Safety Instructions
G
Warning
For safety reasons, only enter a destination
when the vehicle is stationary. When the
vehicle is in motion, a passenger should enter
the destination. Study manual and select
route before driving.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
COMAND calculates the route to the
destination without taking account of the
following:
Traffic lights
R
Stop and right-of-way-signs
R
Lane merging
R
Parking or stopping prohibited areas
R
Other road and traffic rules and regulations
R
Narrow bridges
R
2009-09-03T15:03:17+02:00 - Seite 88
Version: 2.11.8.1
G
Warning
COMAND may give incorrect navigation
commands if the data in the digital map does
not correspond with the actual road/traffic
situation. Digital maps do not cover all areas
nor all routes within an area. For example, if
the traffic routing has been changed or the
direction of a one-way road has been
reversed.
For this reason, you must always observe
applicable road and traffic rules and
regulations during your journey. Road and
traffic rules and regulations always have
priority over the navigation commands
generated by the system.
G
Warning
Navigation announcements are intended to
direct you while driving without diverting your
attention from the road and driving.
Please always use this feature instead of
consulting the map display for directions.
Consulting the symbols or map display for
directions may cause you to divert your
attention from driving and increase your risk
of an accident.
Updating the Map Software
The digital data for the map software will
become obsolete, just like conventional road
maps. Optimum route guidance by the
navigation system is only achieved with up-
to-date map software. Information on new
map software versions is available from an
authorized F-CELL Service Center.
You can have the map software updated there
by means of a DVD or perform the update
process yourself.
Notes on DVD Discs
Only touch the discs at the edges.
R
Handle the discs with care in order to
R
prevent reading errors.