Mercedes-Benz B-Class F-CELL Operator's Manual page 245

245_AKB; 1; 73, en-US
d2ureepe,
Number of recorded status messages
:
X
Press button & or *.
The stored messages will now be displayed
in the order in which they have occurred.
For malfunction and warning messages,
see "Vehicle status messages in the
multifunction display" (
Should the vehicle's system record any
conditions while driving, the number of
messages will reappear in the multifunction
display when the SmartKey in the starter
switch is turned to position 0 or removed
from the starter switch.
Except for high-priority messages, the vehicle
status message memory will be cleared when
you switch off the ignition.
Settings menu
Introduction
In the SettingsTo reset: Press reset
button for 3 seconds, with which you can
reset all the settings to the original factory
settings and a collection of submenus with
which you can make individual settings for
your vehicle.
The following settings and submenus are
available in the SettingsSettings menu:
Resetting to factory settings
R
( Y page 243)
Submenus in the Settings menu
R
( Y page 243)
R
R
R
R
Resetting to factory settings
You can reset the settings of all submenus to
the factory settings.
X
Y page 316).
X
X
The settings you have changed will not be
reset unless you confirm the action by
pressing the reset button a second time. After
approximately 5 seconds, the
SettingsSettings menu reappears in the
multifunction display.
Submenus in the Settings menu
X
X
2009-09-03T15:03:17+02:00 - Seite 243
Version: 2.11.8.1
Control system
Instrument cluster submenu
( Y page 244)
Lighting submenu ( Y page 246)
Y
Vehicle submenu ( page 248)
Convenience submenu ( Y
Press button V or U repeatedly until
the Settings menu appears in the
multifunction display.
Press the reset button in the instrument
cluster for approximately 3 seconds.
The request to press the reset button once
more to confirm appears in the
multifunction display.
Press the reset button once more.
Press button V or U repeatedly until
the Settings menu appears in the
multifunction display.
Press button &.
The collection of the submenus appears in
the multifunction display. There are more
243
page 248)
Z