Mercedes-Benz B-Class F-CELL Operator's Manual page 135

245_AKB; 1; 73, en-US
d2ureepe,
i On certain mobile phones, not only do you
have to activate the Bluetooth function but
the device must also be made "visible" for
other devices.
Each Bluetooth device has a Bluetooth
device name. It is recommended to give the
device a personal name, by which you can
clearly recognize your mobile phone.
i If the Bluetooth function on the COMAND
is switched off, the message Bluetooth
not activated in system settings.
appears.
X
Activate Bluetooth connection on
COMAND ( Y page 85).
Registering a Mobile Phone
(Authorizing)
When you use your mobile phone in
conjunction with COMAND for the first time,
you must register (authorize) it.
It is possible to register several mobile
phones. The connection is always established
to the mobile phone that was activated last.
When you authorize a new mobile phone, it is
activated automatically. You can switch
between the authorized mobile phones
( Y page 134).
Searching for a Mobile Phone
X
In the phone submenu select Phone
£Phone List£Update.
COMAND searches for suitable Bluetooth
phones within range and enters them in the
phone list.
i The duration of the search procedure
depends on the number and type of
Bluetooth phones. The search may take a
few minutes.
When first entering the device list and before
running an update, the black dot R indicates
the active phone (found and authorized).
After running an update:
COMAND telephone (Activating the Mobile Phone)
2009-09-03T15:03:17+02:00 - Seite 133
Version: 2.11.8.1
The check marks Ò indicate if a phone
1
has been authorized (black) or not (grey)
Device not within range but previously
2
authorized (¿ appears in grey)
Phone icons indicate if a phone is found
3
(black) or not (grey)
i If the device list already contains ten
authorized devices, you must de-authorize
one of the authorized devices
( Y page 134). You will then have to switch
this device off and start the search again.
Otherwise the new device you are looking
for will not appear in the list.
X
To start search again: Select Update
Entering Passcode
X
Select the as yet unauthorized device (no
check mark yet) from the list.
X
Select Options£Authorize
or
X
Press 9.
X
The input menu for the passcode appears.
133
Z