Mercedes-Benz B-Class F-CELL Operator's Manual page 131

245_AKB; 1; 73, en-US
d2ureepe,
Storing a Destination in the
Destination Memory
i This function also stores the destination
in the address book. COMAND creates an
address book entry that contains the
complete, navigable address data. You can
then select this entry in the address book
and start route guidance to the address
from there.
After the Address Has Been Entered
X
Select Save after you have entered the
address in the address input menu.
You can now select storage options.
During Route Guidance
X
If necessary, show the menu system
( Y page 93).
X
Select Destination£Save
Destination.
You can now select storage options.
Accepting from the Last Destinations
X
Show the menu system, if necessary
( Y page 93).
X
Select Destination£From Last
Destinations.
The list of previous destinations appears.
X
To select a destination: Press 9
or :.
X
To confirm the destination: Press 9.
The address of the destination is displayed.
X
Select Save.
or
X
Select a destination and then select
Options £ Save.
In both cases, you can then select memory
options.
COMAND navigation system (Destination Memory)
2009-09-03T15:03:17+02:00 - Seite 129
Version: 2.11.8.1
Selecting Memory Options
Saving Destination Without Name
X
Select Save Without Name.
COMAND stores the destination in the
destination memory and uses the address
as the destination name.
or
X
Select Save as My Address.
COMAND stores the destination in the
destination memory as My Address.
If the selected address book entry already
contains address data that can be used for
navigation (¤ icon), a prompt will appear
asking whether you wish to overwrite the
existing data.
X
Select Yes or No.
After selecting Yes, the Saving
Procedure Successful message
appears; selecting No cancels the
procedure.
Saving Destination With Name
X Select Save With Name.
X
Select the category desired, e.g. Home.
The input menu containing data fields and
input characters appears.
Selected data field with cursor
1
Predictive speller
2
X
To enter data: Continue with the step
"Changing Data Field" in the "Creating a
129
Z