Mercedes-Benz B-Class F-CELL Operator's Manual page 104

245_AKB; 1; 73, en-US
d2ureepe,
COMAND navigation system (Destination Input)
102
Selecting a State/Province
i
You can only select those states/
provinces that are stored in the digital map.
The state/province the vehicle is located in
is preselected automatically.
X
Select State/Prov in the Enter
Destination menu.
A menu appears where you can choose one
of the following lists:
Last States/Provinces
R
States (U.S.A.) or
R
Provinces (Canada).
R
X
To select a list: Press 9 or :.
X
Press 9.
The selected state/province list appears.
X
To selected a state/province:Press
9 or :.
X
Press 9.
The Enter Destination menu appears again.
The selected state/province has been
entered automatically.
Entering a City
i You can only enter those cities that are
stored in the digital map. Any zip code that
has already been entered is deleted when
a city is entered.
X
In the Enter Destination menu, select
City.
The city list is displayed with or without
predictive speller. The display of the
predictive speller depends on how many
cities are available for the selected state/
province.
City List with Predictive Speller
If this list is given in the display, the predictive
speller 8 is activated automatically.
2009-09-03T15:03:17+02:00 - Seite 102
Version: 2.11.8.1
Characters entered by the user
1
Characters automatically added by the
2
system
List entry that best matches the
3
characters already entered
Switches to the list without speller
4
Press and hold deletes complete entry,
5
press briefly deletes last character
Currently unavailable characters
6
Currently available characters
7
Predictive Speller
8
Currently selected character
9
Cancels an entry
a
List
b
i
In the predictive speller 8 you can only
select characters 7 that are currently
available. The availability of the characters
depends on the characters already entered
and the data included in the digital map.
When entering characters, the list entry 3
always displays the city that best matches the
characters already entered.
COMAND automatically adds matching
letters 2 to those characters 1 already
entered by the user.
Entering Characters
X
To select characters: Press ; or
=.
X
Press 9 or : to switch between the
lines in the speller.
X
To confirm character selection:
Press 9.