Mercedes-Benz B-Class F-CELL Operator's Manual page 84

245_AKB; 1; 73, en-US
d2ureepe,
System Settings
82
Fuel consumption
:
Average fuel consumption From Start as
;
shown in the multifunction display of the
instrument cluster in the Trip computer
menu
Generated electric power
=
Each bar in the chart represents the average
value for 1 minute.
Resetting values
The values are reset together when resetting
the trip computer in the From Start
submenu ( Y page 249).
Switching the Display On/Off
X
To switch the display off: Select System
£Display Off.
The display is switched off.
X
To switch on the display: Press the 9
button, the k button or one of the
=, ;, : or 9 buttons.
or
X
Press the q button.
The system menu appears.
i You can also press one of the function
buttons, e.g. the h button. This turns on
the display and switches to the
corresponding function.
2009-09-03T15:03:17+02:00 - Seite 82
Version: 2.11.8.1
Time
Setting the Time
i The correct time must be set for the
following functions to operate correctly:
Calculation of expected time of arrival
R
Time stamps for calls received and calls
R
dialed
X
Press the W function button.
X
Select Time £Set Time.
or
X
Select System£Time£Set Time.
Sets the time
1
Current date
2
X
To set value: Press : or 9.
X
To save setting: Press 9.
i The increment for setting the minutes is
30 minutes due to GPS reception.
i If you change the time, previously
selected settings for time zone and
switching between summer time and
standard time are lost.(
Setting the Date/Time Format
X Select System£Time£Format.
The format list appears. The dots R in
front of the list entries indicate the current
setting.
i
The abbreviations mean:
Y page 83).