Mercedes-Benz B-Class F-CELL Operator's Manual page 155

245_AKB; 1; 73, en-US
d2ureepe,
Tuning to a Station via Station Search
X
Press ; or = when the main area is
highlighted.
or
X
Press E or F on the COMAND
control unit.
The search proceeds upwards or
downwards and stops at the next
receivable station.
Tuning to a Station via Manual
Frequency Input
X
Select Radio£Enter Frequency in the
radio display.
An input menu appears.
or
X
Press l on the control unit.
X
To enter a frequency: Press number
buttons on the control unit.
i You can only select numbers that are
currently permissible.
COMAND will tune to the frequency entered.
i If in the FM or AM wavebands you enter a
frequency outside the frequency sub-
range, COMAND will select the next
frequency down.
Tuning to a Station via the Station
Memory
X
Select Presets in the radio display.
or
X
Press 9 when the main area is highlighted.
The station memory appears. The dot R in
front of a preset indicates that the currently
tuned station is stored there.
X
To select a station: Press 9 or :.
X
To tune to a station: Press 9.
or
X
Press a number key, e.g. 4, on the control
unit.
2009-09-03T15:03:17+02:00 - Seite 153
Version: 2.11.8.1
COMAND audio system (Radio)
Wavebands Frequency
AM 530 - 1710 kHz
FM 87.7 - 107.9 MHz
WB (Weather Band) Weather channels
Storing Stations
There are 10 presets available for FM and AM
radio wavebands.
Storing Stations Manually
X
Press 9 when the main area is highlighted.
or
X
Select Presets in the radio display.
In both cases, the station memory will
appear. The dot R in front of a preset
station indicates the station the radio is
currently tuned to.
Station memory
X
To store a station to a selected preset:
Press and hold 9 until a signal tone
sounds.
or
X
Press and hold a number key, e.g. 4, until
a signal tone sounds.
The station is stored.
Storing via Autostore
i The function automatically assigns
receivable stations to the presets, sorted
153
Z