Mercedes-Benz B-Class F-CELL Operator's Manual page 345

245_AKB; 1; 73, en-US
d2ureepe,
Always use a clean lint-free cloth when
R
handling bulbs.
Your hands should be dry and free of oil and
R
grease.
If the newly installed bulb does not come
R
on, contact an authorized F-CELL Service
Center.
i Mercedes-Benz recommends using
Longlife (LL) bulbs.
i Replacing the bulbs for the front lamps is
a technically complex process. For your
convenience, we recommend that you have
this work carried out by an authorized
F-CELL Service Center.
Replacing bulbs for front lamps
X
Switch off the ignition.
X
Turn the exterior lamp switch to position
$.
X
Open the hood (
Housing cover for high-beam headlamp
:
and parking lamp
Housing cover for low-beam headlamps
;
Bulb socket for turn signal lamp
=
Y page 277).
2009-09-03T15:03:17+02:00 - Seite 343
Version: 2.11.8.1
Replacing bulbs
Bulb socket for turn signal lamp
=
Bulb socket for low-beam headlamp bulb
?
Bulb socket for high-beam headlamp bulb
A
Bulb socket for parking and standing lamp
B
bulb
Low-beam bulb
X
Press retaining lug of housing cover ;
downward and remove cover.
X
Pull electrical connector off.
X
Unclip the retainer spring on the bulb
socket ? and take out the bulb.
X
Insert the new bulb so that its socket
locates in the recess of the lamp housing.
X
Clip on the retainer spring.
X
Plug electrical connector onto the bulb.
X
Reattach housing cover ; on the lower
side and fold it upward until it engages.
High-beam bulb
X
Press retaining lug of housing cover :
downward and remove cover.
X
Turn bulb socket A with the bulbs
counterclockwise and remove it.
X
Pull bulb by the base (not by the glass tube)
out of bulb socket A.
X
Insert new bulb so that the bulb base
fits in the recess of the bulb socket
R
rests flush against the bulb socket
R
343
Z