Cas Operating Procedures; Transferring Cas Calls - Avaya definity Operation Manual

CAS operating procedures

CAS operating procedures
Operating procedures for CAS environments work similarly to standard
environments. However, transferring calls, placing calls on hold, console backup
services, and night service function differently in CAS environments. The
following section describes these procedures in detail.

Transferring CAS calls

To transfer CAS calls:
1. Press a call appearance button.
2. Listen for a call identification tone (if provided by the branch).
3. Press the
4. Listen for a dial tone.
NOTE:
Do not continue until you hear a dial tone. The call does not go
through if you proceed before the dial tone sounds.
5. Dial the requested internal or external number.
6. Select one of the following options:
or
or
button.
START
If you are not going to announce the call, press the
as soon as the call starts to ring.
If you are going to announce the call, wait for the called party to
answer. When the called party accepts the call, press the
button.
If the called party declines to talk to the caller, press the
button to reconnect with the caller. Explain to the caller that the
called party is not available; take a message or ask the caller to try
again later; then press the
If the called party, is busy or doesn't answer, press the
button to reconnect with the caller. Explain to the caller that the
called party cannot be reached. If the caller wants to wait, transfer
the call again; then press the
want to wait, take a message and press the
button.
RELEASE
button. If the caller does not
RELEASE
RELEASE
Issue 5 July 2001 77
button
RELEASE
RELEASE
CANCEL
CANCEL
button.