Figure 5-5 Sample Ip Addresses For A Tcpi/Ip Lan-To-Lan Connection; Table 5-1 Tcp/Ip Related Fields In Remote Node Profile - ZyXEL Communications Prestige 202 User Manual

Prestige 202 ISDN Router
The following diagram explains the sample IP addresses to help you understand the field of My
Wan Addr in Menu 11.3.

Figure 5-5 Sample IP Addresses for a TCPI/IP LAN-to-LAN Connection

To configure the TCP/IP parameters of a remote node, first configure the three fields in Menu 11.1
– Remote Node Profile, as shown in the following table. For more details on the IP Option fields,
refer to Chapter 3 – Internet Access Application.
Table 5-1 TCP/IP-related Fields in Remote Node Profile
FIELD
Rem IP Addr
Edit IP
5-4
Enter the IP address of the remote gateway in Menu 11.1 –
Remote Node Profile. You must fill in either the remote
Prestige WAN IP address or the remote Prestige LAN IP
address. This depends on the remote router's WAN IP i.e., for
the (remote) Prestige, the My WAN IP Addr settings in Menu
4. For example, if the remote WAN IP is set to 172.16.0.2 (the
remote router's WAN IP), then you should enter 172.16.0.2 in
the Rem IP Add field. If the remote WAN IP is 0.0.0.0, then
enter 192.168.1.1(the remote router's LAN IP) in the Rem IP
Addr field).
Press [space bar] to select Yes and press [Enter] to go to
–
Menu 11.3 Remote Node Network Layer Options menu.
DESCRIPTION
Remote Node TCP/IP Configuration
OPTION
Yes (Yes/No)