Additionally, you may also need to define static routes if some services reside beyond the
immediate remote LAN.
5.2
Remote Node Setup
Follow the procedure below to configure the TCP/IP parameters in Menu 11 – Remote Node
Profile.
Follow the steps below to edit Menu 11.3 – Remote Node Network Layer Options shown next.
Move the cursor to the Edit IP field in Menu 11 – Remote Node Profile, then press [space bar]
to toggle and set the value to Yes. Press [Enter] to open Menu 11.3 – Network Layer Options.
Figure 5-4 Menu 11.3 – Remote Node TCP/IP Options
Remote Node TCP/IP Configuration
Menu 11.3 - Remote Node Network Layer Options
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= SUA Only
Address Mapping Set= N/A
Metric= 2
Private= No
RIP Direction= None
Version= RIP-2B
Press ENTER to Confirm or ESC to Cancel:
Prestige 202 ISDN Router
5-3