Press "Y" to indicate that you want to continue.
Step 2.
The following procedure is for the HyperTerminal program. The procedure for other serial
communications programs should be similar. Run the HyperTerminal program.
Click "Transfer", then "Send File" to display the following screen.
Step 3.
Step 4.
Enter where the rom configuration file is on your computer and make sure you choose the
XMODEM Protocol. Then press "Send".
Step 5.
After a successful restoration you will see the following screen. Press any key to return to reboot
the system.
Save to ROM
Hit any key to start system reboot.
Keep in mind that the configuration is stored in the flash ROM in the Prestige, so even if power
failure should occur, your configuration is safe.
System Maintenance
Figure 12-15 HyperTerminal Screen
Figure 12-16 Successful Restoration
Prestige 202 ISDN Router
Enter where the rom
configuration file is on your
computer.
Choose the
XMODEM
Protocol.
12-15