Figure 7-14 Menu 15.2.1 -Multiple Server Configuration - ZyXEL Communications Prestige 202 User Manual

Prestige 202 ISDN Router
Enter the index number of the set you want to configure. This brings up Menu 15.2.X
Step 3.
where X is the index number.
Step 4. Enter the service port number in the Port # field and the inside IP address of the server
in the IP Address field.
Figure 7-14 Menu 15.2.1 –Multiple Server Configuration
Step 5. Press [Enter] at the "Press ENTER to confirm ..." prompt to save your configuration
after you define all the servers or press [Esc] at any time to cancel.
The most often used port numbers are shown in the following table. Please refer to RFC-1700 for
further information about port numbers. Please also refer to our PNC Disk for more examples and
details on NAT.
7-16
Menu 15.2.2 - NAT Server Setup
Port #
--------- ---------------
1.Default 0.0.0.0
2.21 192.168.1.33
3.23 192.168.1.34
4.25 192.168.1.35
5.80 192.168.1.36
6. 0 0.0.0.0
7. 0 0.0.0.0
8. 0 0.0.0.0
9. 0 0.0.0.0
10. 0 0.0.0.0
11. 0 0.0.0.0
12. 1025 RR Reserved
Press ENTER to Confirm or ESC to Cancel:
IP Address
NAT