Figure 10-1 Menu 22 - Snmp Configuration - ZyXEL Communications Prestige 202 User Manual

SNMP (Simple Network Management
The SNMP is a protocol governing network management and the monitoring of network devices
and their functions. The Prestige supports the utilization of SNMP to regulate the communication
that occurs between the manager station and the agent stations in a network. Basically, your
Prestige, when connected to the LAN, acts as an agent station. In this way, the manager station on
your LAN can monitor your Prestige as it would another station on the network. Keep in mind
that SNMP is only available if TCP/IP is configured.
Configuring Your Prestige For SNMP Support
The following steps describe a simple setup procedure for configuring SNMP management.
1. From the Main Menu, select option 22. SNMP Configuration. This brings you to Menu 22 –
SNMP Configuration.
SNMP
This chapter takes you through SNMP Configuration Menu 22.
Menu 22 – SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel
Figure 10-1 Menu 22 – SNMP Configuration
Prestige 202 ISDN Router
Chapter 10
Protocol)
10-1