ZyXEL Communications Prestige 202 User Manual
  1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Network Router
  5. ZyXEL Prestige 202
  6. User manual
ZyXEL Communications Prestige 202 User Manual

ZyXEL Communications Prestige 202 User Manual

Hide thumbs Also See for Prestige 202:
Table of Contents

Advertisement

Quick Links

Download this manual
Prestige 202
User's Guide
Version 2.50
(June, 2000)
ZyXEL
T
I
A
S
OTAL
NTERNET
CCESS
OLUTION

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Prestige 202 and is the answer not in the manual?

Questions and answers

Related Manuals for ZyXEL Communications Prestige 202

Summary of Contents for ZyXEL Communications Prestige 202

  • Page 1 Prestige 202 User's Guide Version 2.50 (June, 2000) ZyXEL OTAL NTERNET CCESS OLUTION...
  • Page 3 This publication is subject to change without notice. TRADEMARKS ZyNOS (ZyXEL Network Operating System) is a registered trademark of ZyXEL Communications, Inc. Other trademarks mentioned in this publication are used for identification purposes only and may be properties of their respective owners.
  • Page 4 Prestige 202 ISDN Router Federal Communications Commission (FCC) Interference Statement This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operations.
  • Page 5 Prestige 202 ISDN Router Information for Canadian Users The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective operation and safety requirements. The Industry Canada does not guarantee that the equipment will operate to a user's satisfaction.
  • Page 6 Prestige 202 ISDN Router CE Marking...

  • Page 7: Declaration Of Conformity

    Prestige 202 ISDN Router Declaration of Conformity We, the Manufacturer/Importer ZyXEL Communications Services GmbH. Thaliastrasse 125a/2/2/4 A-1160 Vienna – AUSTRIA declare that the product Prestige 202 is in conformity with (Reference to the specification under which conformity is declared) STANDARD...

  • Page 8: Zyxel Limited Warranty

    Prestige 202 ISDN Router ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two (2) years from the date of purchase. During the warranty period and upon proof of...
  • Page 9 Prestige 202 ISDN Router Customer Support If you have questions about your ZyXEL product or desire assistance, contact ZyXEL Communications Corporation offices worldwide, in one of the ways listed. Our ftp sites are also available for software and ROM upgrades.

  • Page 10: Table Of Contents

    LAN-to-LAN Connection ....................1-5 1.2.3 Remote Access Server .......................1-6 Chapter 2 Hardware Installation and Initial Setup..............2-1 Front Panel LEDs of Prestige 202................2-1 Prestige 202 Rear Panel and Connections..............2-2 Additional Installation Requirements ................2-3 Housing........................2-4 Power On Your Prestige ....................2-4 Navigating the SMT Interface ..................
  • Page 11 Prestige 202 ISDN Router 2.12 Configuring the Prestige as a NetCAPI Server ............2-18 2.12.1 Installing RVS-CE and RVS-COM lite Software ............. 2-19 2.12.2 Configuring NetCAPI ..................... 2-20 2.13 Ethernet Setup ......................2-25 2.13.1 General Ethernet Setup....................2-26 2.14 Protocol Dependent Ethernet Setup................2-26 Chapter 3 Internet Access.....................
  • Page 12 Prestige 202 ISDN Router LAN-to-LAN Server Application..................6-2 Default Dial-in User Setup ................... 6-3 6.3.1 CLID Callback Support For Dial-In Users................6-3 6.3.2 Default Dial-in Filter ......................6-6 Dial-In Users Setup ..................... 6-6 6.4.1 Remote Access Under Windows® ..................6-9 6.4.2 CLID Authentication .......................6-11 6.4.3...
  • Page 13 Prestige 202 ISDN Router 8.4.1 How to Use Call Waiting ....................8-3 Three-Way Calling....................... 8-3 8.5.1 How to Use Three-Way Calling..................8-3 Call Transfer........................ 8-4 8.6.1 How to Use Call Transfer ....................8-4 8.6.2 To Do a Blind Transfer: ....................8-4 Call Forwarding ......................
  • Page 14 Prestige 202 ISDN Router Chapter 12 System Maintenance ..................12-1 12.1 System Status ......................12-2 12.1.1 System Information ......................12-4 12.1.2 Console Port Speed......................12-5 12.2 Log and Trace ......................12-5 12.2.1 Viewing Error Log ......................12-6 12.2.2 Syslog And Accounting ....................12-6 12.3 Diagnostic ......................... 12-8 12.4 Filename Conventions.....................
  • Page 15 Prestige 202 ISDN Router Appendix C Power Adapter Specifications ................D Index ............................E xiii Table of Contents...

  • Page 16: List Of Figures

    Figure 1-1 Internet Access Application .....................1-5 Figure 1-2 LAN-to-LAN Connection Application ..................1-6 Figure 1-3 Remote Access ........................1-6 Figure 2-1 Front Panel of Prestige 202 ......................2-1 Figure 2-2 Prestige 202 Rear Panel ......................2-2 Figure 2-3 Power-on Display for DSS1 Switches..................2-4 Figure 2-4 Power-on Display for USA Switches..................2-5 Figure 2-5 Login Screen ...........................2-5...
  • Page 17 Prestige 202 ISDN Router Figure 4-2 Menu 11.1 – Remote Node Profile ................... 4-2 Figure 4-3 Menu 11.2 – Remote Node PPP Options .................. 4-8 Figure 4-4 Menu 11.5 – Remote Node Filter ................... 4-10 Figure 5-1 TCP/IP LAN-to-LAN Application ................... 5-1 Figure 5-2 LAN 1 Setup ...........................
  • Page 18 Prestige 202 ISDN Router Figure 7-8 SUA Address Mapping Rules....................7-9 Figure 7-9 First Set in Menu 15.1.1......................7-10 Figure 7-10 Editing the First Rule in a Set....................7-12 Figure 7-11 Editing the Second Rule in a Set...................7-13 Figure 7-12 Multiple Servers Behind NAT ....................7-15 Figure 7-13 Menu 15.2 –...
  • Page 19 Prestige 202 ISDN Router Figure 9-16 Menu 21.3.2 – TCP/IP Filter Rule..................9-18 Figure 9-17 Menu 21.3 – Filter Rules Summary..................9-18 Figure 9-18 Menu 11.5 – Remote Node Filter ..................9-19 Figure 9-19 Sample Telnet Filter ......................9-19 Figure 9-20 Sample Filter – Menu 21.3.1....................9-21 Figure 9-21 Sample Filter Rules Summary –...
  • Page 20 Prestige 202 ISDN Router Figure 12-26 Menu 24.9.3 – Budget Management .................12-25 Figure 12-27 Call History ........................12-26 Figure 12-28 System Maintenance – Time and Date Setting ..............12-27 Figure 13-1 Schedule Setup ........................13-1 Figure 13-2 Schedule Setup ........................13-1 Figure 13-3 Schedule Set Setup.......................13-2 Figure 13-4 Applying Schedule Set(s) to a Remote Node.................13-4...
  • Page 21 Prestige 202 ISDN Router List of Tables Table 1-1 Prestige Scenarios ........................xix Table 2-1 LED Functions.......................... 2-1 Table 2-2 Main Menu Commands......................2-6 Table 2-3 Main Menu Summary ....................... 2-7 Table 2-4 General Setup Menu Fields ..................... 2-11 Table 2-5 SPIDs, Phone Numbers, Switch Types..................2-11 Table 2-6 North American ISDN Menu Setup Fields................
  • Page 22 Prestige 202 ISDN Router Table 7-6 Services and Port Numbers......................7-17 Table 8-1 Supplemental Services by Region ....................8-1 Table 8-2 Phone Flash Commands ......................8-5 Table 9-1 Abbreviations Used in the Filter Rules Summary Menu .............9-5 Table 9-2 Abbreviations Used if Filter Type is IP ..................9-6 Table 9-3 Abbreviations Used if Filter Type is GEN..................9-6...

  • Page 23: Preface

    Congratulations on your purchase of the Prestige 202 ISDN Router. The Prestige 202 is a high-performance router that offers a complete Internet Access solution. You do not need to set any switches to configure the Prestige. The user-friendly Prestige Network Commander (PNC) is a C++ utility that allows you to manage the Prestige via a Graphical User Interface (GUI).
  • Page 24 Prestige 202 ISDN Router Please note that every machine on an internet must have a unique IP address – do not assign an arbitrary address to any machine. If you are not sure as to which IP address to assign to the Prestige, contact your Internet Service Provider (ISP) or refer to Chapter 3 of this guide for more details.
  • Page 25 For brevity’s sake, we will use “e.g.,” as a shorthand for “for instance”, and “i.e.,” as a shorthand for “that is” or “in other words” throughout this manual. • The Prestige 202 may also be referred to as the Prestige or the P202 from now on, in this manual. xxiii...

  • Page 26: Prestige Scenarios

    Prestige 202 ISDN Router Prestige Scenarios For fast access to sample SMT menus, refer to the following sections on how to configure the Prestige for various possible scenarios. SCENARIO GO TO SECTION To reset your Prestige 2.8.1 DHCP 3.2.4 Internet Access LAN-to-LAN application Remote Access under Windows®...
  • Page 27 Prestige 202 ISDN Router General Structure of This Manual Getting Started (Chapters 1 and 2) This helps you connect, install and setup your Prestige to operate on your network The Internet (Chapter 3) This shows you how to configure your Prestige for Internet access.
  • Page 28 Part I: GETTING STARTED Chapters 1 to 3 are structured as a step-by-step guide to help you connect, install and setup your Prestige to operate on your network and access the Internet.

  • Page 30: Chapter 1 Getting To Know Your Isdn Router

    Prestige 202 ISDN Router Chapter 1 Getting to Know Your ISDN Router This chapter covers the key features and main applications of your Prestige. Features of the Prestige Time and Date Setting This new feature allows the Prestige to connect to a time server in order to synchronize its system clock when it is booting.
  • Page 31 Prestige 202 ISDN Router IP Alias This feature is described as the ability to partition a physical network into logical networks over the same Ethernet interface. You can use three logical LAN interfaces via a single physical Ethernet interface, with the Prestige acting as the gateway for all the LAN networks.
  • Page 32 Prestige 202 ISDN Router TCP/IP and PPP Support ♦ TCP/IP (Transmission Control Protocol/Internet Protocol) network layer protocol. ♦ PPP/MP (Point-to-Point Protocol/Multilink Protocol) link layer protocol. Dial-On-Demand The Dial-On-Demand feature allows the Prestige to automatically place a call to a remote gateway based on the triggering packet’s destination without user intervention.
  • Page 33 Prestige 202 ISDN Router DHCP Support DHCP (Dynamic Host Configuration Protocol) allows the individual clients (workstations) to obtain the TCP/IP configuration at start-up from a centralized DHCP server. The Prestige has built-in DHCP server capability, enabled by default, which means it can assign IP addresses, an IP default gateway and DNS servers to Windows®...

  • Page 34: Internet Access With The Prestige

    Prestige 202 ISDN Router Caller ID Display Services on Analog PSTN Lines The Prestige supports Caller ID information on both phone ports. To use Caller ID Display you need a special telephone or display unit that can show and store incoming telephone numbers.

  • Page 35: Remote Access Server

    Prestige 202 ISDN Router Figure 1-2 LAN-to-LAN Connection Application 1.2.3 Remote Access Server Your Prestige allows remote users to dial-in and gain access to your LAN. This feature enables users that have workstations with remote access capabilities, e.g., Windows® 98, to dial in to access the network resources without physically being in the office.

  • Page 36: Chapter 2 Hardware Installation And Initial Setup

    Front Panel LEDs of Prestige 202 The LED indicators on the front panel indicate the operational status of the Prestige. The table after the diagram describes the LED functions: Figure 2-1 Front Panel of Prestige 202 Table 2-1 LED Functions DESCRIPTION The PWR (power) LED is on when power is applied to the Prestige.

  • Page 37: Prestige 202 Rear Panel And Connections

    The LED is steady on when SPID negotiation has been successful and the ISDN line has been successfully initialized. Prestige 202 Rear Panel and Connections The next figure shows the rear panel connectors of your Prestige. Figure 2-2 Prestige 202 Rear Panel...

  • Page 38: Additional Installation Requirements

    Prestige 202 ISDN Router This section outlines how to connect your Prestige to the LAN and to the ISDN network. Connecting the ISDN Line Step 1. Connect the Prestige to the ISDN network using the included ISDN cable. Plug one end of the cable into the port labeled ISDN BRI and the other to the ISDN wall jack.

  • Page 39: Housing

    When you power on your Prestige, it performs several internal tests as well as line initialization. After the initialization, the Prestige asks you to press [Enter] to continue, as shown. Copyright (c) 1994 - 2000 ZyXEL Communications Corp. initialize ch =0, ethernet address: 00:a0:c5:21:ce:67 (2) DSS1: Press ENTER to continue...

  • Page 40: Figure 2-4 Power-On Display For Usa Switches

    Prestige 202 ISDN Router Copyright (c) 1994 - 1999 ZyXEL Communications Corp. initialize ch =0, ethernet address: 00:a0:c5:01:23:45 (1) USA: Press ENTER to continue... Figure 2-4 Power-On Display for USA Switches Entering Password Step 2. The login screen appears after you press [Enter], prompting you to enter the password as shown in the following figure.

  • Page 41: Navigating The Smt Interface

    Prestige 202 ISDN Router Navigating the SMT Interface The SMT (System Management Terminal) is the interface that you use to configure your Prestige. Several operations that you should be familiar with before you attempt to modify the configuration are listed in the following table.

  • Page 42: System Management Terminal Interface Summary

    Prestige 202 ISDN Router After you enter the password, the SMT displays the Main Menu, as shown. Copyright (c) 1994 - 2000 ZyXEL Communications Corp. Prestige 202 Main Menu Getting Started Advanced Management 1. General Setup 21. Filter Set Configuration 2.

  • Page 43: Changing The System Password

    Prestige 202 ISDN Router System Maintenance This menu provides system status, diagnostics, software upload, etc. This menu allows the Prestige to manage a remote node and dictate Schedule Setup when a remote node should be called and for how long.

  • Page 44: Resetting The Prestige

    Prestige 202 ISDN Router Resetting the Prestige If you have forgotten your password or for some reason cannot access the SMT menu you will need to reinstall the configuration file. Uploading the configuration file replaces the current one with the default configuration file, you will lose all configurations that you had before and the speed of the console port will be reset to the default of 9600 bps with 8 data bit, no parity, 1 stop bit (8n1), and no Flow Control.

  • Page 45: General Setup

    Prestige 202 ISDN Router General Setup Menu 1 – General Setup contains administrative and system-related information. To enter Menu 1 and fill in the required information, follow these steps: Enter 1 in the Main Menu to open Menu 1 – General Setup.

  • Page 46: Isdn Setup Menus

    Prestige 202 ISDN Router Table 2-4 General Setup Menu Fields FIELD DESCRIPTION EXAMPLE System Name Choose a descriptive name, up to 30 alphanumeric characters long (no P202 – spaces, but dashes “ ” and underscores "_" are accepted) for identification purposes. This name can be retrieved remotely via SNMP, used for CHAP authentication, and displayed at the prompt in the Command Mode.

  • Page 47: Figure 2-10 North American Isdn Setup

    Prestige 202 ISDN Router Menu 2 - ISDN Setup Switch Type: AT&T 5ESS NI-1 B Channel Usage= Switch/Switch 1st Phone #= ? SPID #= ? Incoming Analog Call= Phone 1 2nd Phone #= SPID #= Incoming Analog Call= Phone 2...

  • Page 48: Call Forwarding

    Prestige 202 ISDN Router FIELD DESCRIPTION This tells the Prestige how to route an incoming analog call. Set to Phone1 if you Incoming Analog Call wish to route the incoming analog call for this telephone number to the PHONE port 1 (a.k.a., ‘POTS’ port in North America and ‘A/B Adapter’ in Europe). Set to Phone2 if you wish to route the incoming analog call for this telephone number to PHONE port 2.

  • Page 49: Figure 2-11 Menu 2.1 - Isdn Advanced Setup

    Prestige 202 ISDN Router Table 2-7 NI-1 Default Feature Key Settings FEATURE DEFAULT FEATURE KEY 3-Way Calling (Conference) Call Transfer Call Drop Call Forwarding If your phone company cannot support these default Feature Key settings, ask the phone company representative to provide you with settings which are within their support range. Then select Yes in the Edit Advanced Setup field in Menu 2 above and change the settings in Menu 2.1 –...

  • Page 50: European (Dss1) Isdn Setup Menus

    Prestige 202 ISDN Router Table 2-8 Menu 2.1 – ISDN Advanced Setup Fields Call Waiting Enable allows you to place a call on hold while you answer another incoming call on the same telephone (directory) number. First Data This field dictates which directory number (B-channel) you prefer to Call use for the first data call.

  • Page 51: Figure 2-12 Menu 2 - Isdn Setup For Dss1

    Prestige 202 ISDN Router Global Calls A global call is an incoming analog call where the switch did not send the dialed number. This happens most often when the call originates from an analog telephone line. If you specify explicit matching, i.e., Incoming Phone Number Matching is either MSN or Called Party Subaddress, then global calls are always ignored.

  • Page 52: Netcapi

    Prestige 202 ISDN Router Table 2-9 Menu 2 – ISDN Setup Switch Type This field is fixed as DSS1or 1TR6. B Channel Usage In general, this is Switch/Switch. If you are only using one B channel (e.g., your Prestige is sharing the ISDN BRI line with another device on the S/T bus), then select Switch/Unused.

  • Page 53: Capi

    Prestige 202 ISDN Router 2.11.1 CAPI CAPI is an interface standard that allows applications to access ISDN services. Several applications can share one or more ISDN lines. When an application wants to communicate with an ISDN terminal it sends a series of standard commands to the terminal. The CAPI standard defines the commands and allows you to use a well-defined mechanism for communications using ISDN lines.

  • Page 54: Installing Rvs-Ce And Rvs-Com Lite Software

    Prestige 202 ISDN Router NOTE: When configuring your Prestige with the PNC, use PNC version 2.10 and higher. By default, NetCAPI is enabled on your Prestige. When NetCAPI is enabled, the Prestige listens for incoming DCP messages from the workstations. By default, the Prestige listens for DCP messages on TCP port 2578.

  • Page 55: Configuring Netcapi

    Prestige 202 ISDN Router 2.12.2 Configuring NetCAPI Step 1 Go to Menu 2 – ISDN Setup. Menu 2 - ISDN Setup Switch Type: DSS-1 B Channel Usage= Switch/Switch Incoming Phone Numbers: ISDN Data 5009087 Subaddress= A/B Adapter 1 = 5009088...

  • Page 56: Figure 2-15 Menu 2.2 - Netcapi Setup

    Prestige 202 ISDN Router Menu 2.2 - NetCAPI Setup Active= Yes Max Number of Registered Users= 5 Incoming Data Call Number Matching= Multiple Subscriber Number (MSN) Access List: Start IP End IP Operation 192.168.1.132 192.168.1.145 Both 192.168.14.1 192.168.14.32 Incoming 192.168.20.7 192.168.20.12...
  • Page 57 Prestige 202 ISDN Router Select Called Party Subaddress if you want to direct all incoming calls to the Prestige only when the incoming call matches the subaddress of ISDN DATA in Menu 2. If the incoming call does not match the subaddress of ISDN DATA, then the call will be routed to NetCAPI.

  • Page 58: Figure 2-16 Prestige Behind A Pabx

    Prestige 202 ISDN Router PABX Outside Line Prefix A PABX (Private Automatic Branch eXchange) generally requires you to dial a number (a single digit in most cases) when you need an outside line. If your Prestige is connected to a PABX, enter this number in PABX Outside Line Prefix, otherwise, leave it blank.
  • Page 59 Prestige 202 ISDN Router Hangup Silence Time Some devices, e.g., some answering machines, only recognize that a calling party has hung up after a period of silence. This field sets the silence-time period, which can be from 0 (default) to 60 seconds.

  • Page 60: Ethernet Setup

    Prestige 202 ISDN Router Menu 2.1 - ISDN Advanced Setup Phone 1 Call Waiting= Enable Phone 2 Call Waiting= Enable Calling Line Indication= Enable PABX Outside Line Prefix= PABX Number (Include S/T Bus Number) for Loopback= Outgoing Calling Party Number:...

  • Page 61: General Ethernet Setup

    Prestige 202 ISDN Router Menu 3 - Ethernet Setup 1. General Setup 2. TCP/IP and DHCP Setup Enter Menu Selection Number: Figure 2-19 Menu 3 – Ethernet Setup 2.13.1 General Ethernet Setup This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You seldom need to filter Ethernet traffic;...

  • Page 62: Chapter 3 Internet Access

    Prestige 202 ISDN Router Chapter 3 Internet Access This chapter shows you how to configure the LAN as well as the WAN of your Prestige for Internet access. Factory Ethernet Defaults The Ethernet parameters of the Prestige are preset in the factory with the following values: 1.

  • Page 63: Private Ip Addresses

    Prestige 202 ISDN Router Let us say you select 192.168.1.0 as the network number; which covers 254 individual addresses, from 192.168.1.1 to 192.168.1.254 (zero and 255 are reserved). In other words, the first 3 numbers specify the network number while the last number identifies an individual workstation on that network.

  • Page 64: Rip Setup

    Prestige 202 ISDN Router 3.2.3 RIP Setup RIP (Routing Information Protocol) allows a router to exchange routing information with other routers. The RIP Direction field controls the sending and receiving of RIP packets. When set to Both, the Prestige will broadcast its routing table periodically and incorporate the RIP information that it receives;...
  • Page 65 Prestige 202 ISDN Router DNS Server Address DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice versa, e.g., the IP address of www.zyxel.com is 204.217.0.2. The DNS server is extremely important because without it, a user must know the IP address of a machine before s/he can access There are two ways that an ISP disseminates the DNS server addresses.

  • Page 66: Tcp/Ip Ethernet Setup And Dhcp

    Prestige 202 ISDN Router TCP/IP Ethernet Setup and DHCP You will now use Menu 3.2 to configure your Prestige for TCP/IP. To edit Menu 3.2, select the menu option Ethernet Setup in the Main Menu. When Menu 3 . The screen now...

  • Page 67: Table 3-1 Dhcp Ethernet Setup Menu Fields

    Prestige 202 ISDN Router Follow the instructions in the next table on how to configure the DHCP fields. Table 3-1 DHCP Ethernet Setup Menu Fields FIELD DESCRIPTION EXAMPLE DHCP Setup DHCP This field enables/disables the DHCP server. If set to Server, your None Prestige will act as a DHCP server.

  • Page 68: Ip Alias

    Prestige 202 ISDN Router Perform the instructions in the following table to configure TCP/IP parameters for the Ethernet port. Table 3-2 TCP/IP Ethernet Setup Menu Fields FIELD DESCRIPTION EXAMPLE TCP/IP Setup IP Address Enter the IP address of your Prestige in dotted decimal notation.

  • Page 69: Ip Alias Setup

    Prestige 202 ISDN Router IP Alias Setup You must use Menu 3.2 to configure the first network and move the cursor to Edit IP Alias field and toggle [space bar] to choose Yes and press [Enter] to configure the second and third network.

  • Page 70: Figure 3-5 Menu 3.2.1 - Ip Alias Setup

    Prestige 202 ISDN Router Menu 3.2.1 - IP Alias Setup IP Alias 1= No IP Address= N/A IP Subnet Mask= N/A RIP Direction= N/A Version= N/A Incoming protocol filters= N/A Outgoing protocol filters= N/A IP Alias 2= No IP Address= N/A...

  • Page 71: Internet Access Configuration

    Prestige 202 ISDN Router When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel. Internet Access Configuration Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually a simplified setup for one of the remote nodes that you can access in Menu 11.

  • Page 72: Sample Internet Access Configuration

    Prestige 202 ISDN Router From the Main Menu, enter option Internet Access Setup to go to Menu 4 – Internet Access Setup, as shown in the following figure. 3.6.1 Sample Internet Access Configuration The table following this menu contains instructions on how to configure your Prestige for Internet access.

  • Page 73: Table 3-5 Internet Access Setup Menu Fields

    Prestige 202 ISDN Router Table 3-5 Internet Access Setup Menu Fields FIELD DESCRIPTION ISP’s Name Enter the name of your Internet Service Provider, e.g., myISP. This information is for identification purposes only. Pri Phone and Sec Phone # Both the Primary and the Secondary Phone number refer to the number that the Prestige dials to connect to the ISP.

  • Page 74: Advanced Applications

    Part II: ADVANCED APPLICATIONS Advanced Applications (Chapters 4 to 8) describe the advanced applications of your Prestige, such as Remote Node Configuration, Remote Node TCP/IP Configuration, Dial-in Server Configuration, NAT and Advanced Phone Services.

  • Page 75: Chapter 4 Remote Node Configuration

    Prestige 202 ISDN Router Chapter 4 Remote Node Configuration This chapter covers the parameters that are protocol independent. The protocol-dependent configuration (TCP/IP) is covered in the next chapter. A remote node is required for placing calls to a remote gateway. A remote node represents both the remote gateway and the network behind it across a WAN connection.

  • Page 76: Remote Node Profile

    Prestige 202 ISDN Router 4.1.2 Remote Node Profile To configure a remote node, follow these steps: From the Main Menu, select menu option 11. Remote Node Setup Step 1. When Menu 11 appears as shown in the following figure, enter the number of the remote Step 2.

  • Page 77: Table 4-1 Remote Node Profile Menu Fields

    Prestige 202 ISDN Router Table 4-1 Remote Node Profile Menu Fields FIELD DESCRIPTION OPTIONS Rem Node Name This is a required field [?]. Enter a descriptive name for the remote node, for example, Corp. This field can be up to eight characters. This name must be unique from any other remote node name or remote dial-in user name.
  • Page 78 Prestige 202 ISDN Router FIELD DESCRIPTION OPTIONS the call will be dropped. Incoming: Call Back Yes/No This field is applicable only if Call Direction is set to Both. Otherwise, a N/A appears in the field. This field determines whether or not your Prestige will call back after receiving a call from this remote node.
  • Page 79 Prestige 202 ISDN Router FIELD DESCRIPTION OPTIONS Rem IP Addr This is a required field [?] if Route is set to IP. Enter the IP address of the remote gateway. Edit IP Press [space bar] to select Yes and press [Enter] to go No/Yes –...

  • Page 80: Outgoing Authentication Protocol

    Prestige 202 ISDN Router FIELD DESCRIPTION OPTIONS Once you have completed filling in Menu 11.1 – Remote Node Profile, press [Enter] at the message [Press ENTER to Confirm … ] to save your configuration, or press [Esc] at any time to cancel.

  • Page 81: Editing Ppp Options

    Prestige 202 ISDN Router Table 4-2 BTR vs MTR for BOD BTR AND MTR SETTING No. of Channel(s) Max No. of BANDWIDTH ON Used Channel(s) Used DEMAND BTR = 64, MTR = 64 BTR = 64, MTR = 128 BTR = 128, MTR = 128...

  • Page 82: Figure 4-3 Menu 11.2 - Remote Node Ppp Options

    Prestige 202 ISDN Router Menu 11.2 - Remote Node PPP Options Encapsulation= Standard PPP Compression= No BACP= Enable Multiple Link Options: BOD Calculation= Transmit or Receive Base Trans Rate(Kbps)= 64 Max Trans Rate(Kbps)= 64 Target Utility(Kbps)= 32-48 Add Persist(sec)= 5...

  • Page 83: Table 4-3 Remote Node Ppp Options Menu Fields

    Prestige 202 ISDN Router Table 4-3 Remote Node PPP Options Menu Fields FIELD DESCRIPTION OPTION Encapsulation Select CISCO PPP only when this remote node is a Standard PPP Cisco machine; otherwise, select Standard PPP. CISCO PPP Compression Turn on/off Stac Compression. The default for this Yes/No field is No.

  • Page 84: Remote Node Filter

    Prestige 202 ISDN Router 4.1.7 Remote Node Filter Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing traffic between this remote node and the Prestige and also to prevent certain packets from triggering calls.

  • Page 85: Chapter 5 Remote Node Tcp/Ip Configuration

    Prestige 202 ISDN Router Chapter 5 Remote Node TCP/IP Configuration This chapter shows you a sample LAN-to-LAN application and how to configure the TCP/IP parameters of a remote node. LAN-to-LAN Application A typical LAN-to-LAN application is to use your Prestige to connect a branch office to the headquarters, as depicted in the following diagram.

  • Page 86: Figure 5-2 Lan 1 Setup

    Prestige 202 ISDN Router LAN 1 Setup Menu 11.1 - Remote Node Profile IP address of the Rem Node Name= LAN_2 Edit PPP Options= No Active= Yes Rem IP Addr= 192.168.2.1 Prestige on Call Direction= Both Edit IP= No LAN 2...

  • Page 87: Remote Node Setup

    Prestige 202 ISDN Router Additionally, you may also need to define static routes if some services reside beyond the immediate remote LAN. Remote Node Setup Follow the procedure below to configure the TCP/IP parameters in Menu 11 – Remote Node Profile.

  • Page 88: Figure 5-5 Sample Ip Addresses For A Tcpi/Ip Lan-To-Lan Connection

    Prestige 202 ISDN Router The following diagram explains the sample IP addresses to help you understand the field of My Wan Addr in Menu 11.3. Figure 5-5 Sample IP Addresses for a TCPI/IP LAN-to-LAN Connection To configure the TCP/IP parameters of a remote node, first configure the three fields in Menu 11.1 –...

  • Page 89: Table 5-2 Tcp/Ip Remote Node Configuration

    Prestige 202 ISDN Router The following table shows the TCP/IP-related fields in Menu 11.3 – Remote Node Network Layer Options. Table 5-2 TCP/IP Remote Node Configuration FIELD DESCRIPTION OPTION Rem IP Addr This will show the IP address you entered for this remote node in the previous menu.

  • Page 90: Static Route Setup

    Prestige 202 ISDN Router FIELD DESCRIPTION OPTION Once you have completed filling in the Remote Node Network Layer Options menu, press [Enter] to return to Menu 11.1. Press [Enter] at the message [Press ENTER to Confirm . . . ] to save your configuration, or press [Esc] at any time to cancel.

  • Page 91: Figure 5-7 Menu 12 - Ip Static Route Setup

    Prestige 202 ISDN Router To configure an IP static route, use Menu 12 – IP Static Route Setup, as displayed next. Menu 12 - IP Static Route Setup 1. ________ 2. ________ 3. ________ 4. ________ 5. ________ 6. ________ 7.
  • Page 92 Prestige 202 ISDN Router FIELD DESCRIPTION the network number to be identical to the host ID. IP Subnet Mask Enter the subnet mask for this destination. Follow the discussion on IP subnet mask in this chapter. Gateway IP Address Enter the IP address of the gateway. The gateway is an immediate neighbor of your Prestige that will forward the packet to the destination.

  • Page 93: Chapter 6 Dial-In Server Configuration

    Prestige 202 ISDN Router Chapter 6 Dial-in Server Configuration This chapter shows you how to configure your Prestige to receive calls from remote dial-in users, e.g., telecommuters, as well as remote nodes. There are several differences between dial-in users and remote nodes, as summarized in the next table.

  • Page 94: Lan-To-Lan Server Application

    Prestige 202 ISDN Router Figure 6-1 Example of Telecommuting LAN-to-LAN Server Application Your Prestige can also be used as a dial-in server for LAN-to-LAN application to provide access for the workstations on a remote network. For your Prestige to be set up as a LAN-to-LAN server, you need to configure the Default Dial-in User Setup to set the operational parameters for incoming calls.

  • Page 95: Default Dial-In User Setup

    Prestige 202 ISDN Router Default Dial-in User Setup This section covers the default dial-in parameters. The parameters in Menu 13 affect incoming calls from both remote dial-in users and remote nodes until authentication is completed. Once authentication is completed and if it matches a remote node, your Prestige will use the parameters from that particular remote node.

  • Page 96: Table 6-2 Default Dial-In Setup Fields

    Prestige 202 ISDN Router From the Main Menu, enter 13 to go to Menu 13 – Default Dial-in Setup. This section describes how to configure the protocol-independent fields in this menu. For the protocol-dependent fields, refer to the appropriate chapters.
  • Page 97 Prestige 202 ISDN Router FIELD DESCRIPTION OPTIONS Enter in the outgoing password to be used to respond to O/G Password the peer’s authentication request. Multiple Link Options: Enter the maximum data transfer rate between your – Prestige and the remote dial-in user. 64...

  • Page 98: Default Dial-In Filter

    Prestige 202 ISDN Router FIELD DESCRIPTION OPTIONS IP Count (1, 2) 192.68.135.5 and 192.68.135.6. The IP count is the 1, 2 number of consecutive IP addresses allowed. Select Yes, then press [Enter] to edit the filter sets. Keep in mind that the filter set(s) will only apply to remote dial- Session Options: in users but not the remote nodes.

  • Page 99: Figure 6-5 Menu 14 - Dial-In User Setup

    Prestige 202 ISDN Router Menu 14 - Dial-in User Setup 1. johndoe 2. ________ 3. ________ 4. ________ 5. ________ 6. ________ 7. ________ 8. ________ Enter Menu Selection Number: Figure 6-5 Menu 14 – Dial-in User Setup Select one of the users by number, this will bring you to Menu 14.1 – Edit Dial-in User, Step 2.
  • Page 100 Prestige 202 ISDN Router FIELD DESCRIPTION OPTION Yes/No – Inactive users are displayed with a [ ] (minus sign) at the beginning of the name in Menu 14. Password Enter the password for the remote dial-in user. Callback This field determines if your Prestige will allow call back to this user upon dial-in.

  • Page 101: Remote Access Under Windows

    Prestige 202 ISDN Router 6.4.1 Remote Access Under Windows® Figure 6-7 Sample Remote Access Dial-in Server Configuration...

  • Page 102: Figure 6-8 Configuring Menu 13 For Remote Access

    Prestige 202 ISDN Router Configuring Your Prestige Menu 13 - Default Dial-in Setup Telco Options: IP Address Supplied By: CLID Authen= None Dial-in User= Yes IP Pool= Yes IP Pool for PPP Options: IP Start Addr= 192.168.250.250 Recv Authen= PAP...

  • Page 103: Clid Authentication

    Prestige 202 ISDN Router 6.4.2 CLID Authentication CLID (Calling Line IDentification) authentication affords you the security of limiting a user to only initiate connections from a fixed location. The Prestige uses the caller ID sent by the switch to match against the CLIDs in the database. Please note that for CLID authentication to work on the Prestige, your telephone company must support caller ID.

  • Page 104: Figure 6-10 Lan 1 Lan-To-Lan Application

    Prestige 202 ISDN Router LAN 1 Menu 11.1 - Remote Node Profile Set Call Direction Rem Node Name= LAN_2 Edit PPP Options= No and Call Back to Active= Yes Rem IP Addr= 192.168.2.1 Both Call Direction= Both Edit IP= No respectively.

  • Page 105: Figure 6-12 Testing Callback With Your Connection

    Prestige 202 ISDN Router Testing Callback With Your Connection Go to Menu 24.4.5 of the Prestige on LAN 1 and enter the numbers that correspond to the menu in LAN 1 above. Start dialing for node <LAN_2> Prestige on LAN 1 calls ### Hit any key to continue.###...

  • Page 106: Configuring The Prestige For Callback With Clid

    Prestige 202 ISDN Router 6.4.4 Configuring the Prestige for Callback With CLID The only difference between callback with CLID (Calling Line Identification) and callback described above is that you do not pay for the first call, i.e., when the Prestige on LAN 1 calls the Prestige on LAN 2.

  • Page 107: Figure 6-14 Configuring Clid With Callback

    If CLID authentication fails, this means that the calling number does not match the Rem CLID number in Menu 11.1. CLID Copyright (c) 1994 - 1999 ZyXEL Communications Corp. Authentication LAN_2>sys trcl call...

  • Page 109: Chapter 7 Nat (Network Address Translation)

    Prestige 202 ISDN Router Chapter 7 NAT (Network Address Translation) This chapter discusses how to configure NAT on the Prestige. Introduction NAT (Network Address Translation - NAT, RFC-1631) is the translation of an Internet Protocol address used within one network to a different IP address known within another network. One network is designated as the inside network and the other is the outside.

  • Page 110: How Nat Works

    Prestige 202 ISDN Router NAT can provide firewall protection if you do not specify a server (for Many-to-One and Many-to-Many Overload mapping) and all incoming inquiries will be filtered out by your Prestige. UDP and TCP packets can be routed. In addition, partial ICMP, including echo and traceroute, is supported.

  • Page 111: Nat Mapping Types

    Prestige 202 ISDN Router 7.1.3 NAT Mapping Types NAT supports five types of IP/port mapping. They are: 1. One to One: In One-to-One mode, the Prestige maps one local IP address to one global IP address. 2. Many to One: In Many-to-One mode, the Prestige maps multiple local IP addresses to one global IP address.

  • Page 112: Nat Application

    Prestige 202 ISDN Router NAT Application The following figure illustrates a possible NAT application, where three inside LANs behind the Prestige can “talk” to three distinct Internet destinations. More examples follow at the end of this chapter. Figure 7-2 NAT Application...

  • Page 113: Smt Menus

    SMT Menus 7.4.1 NAT Setup in the Main Menu Enter 15 from the main menu to configure NAT (this was SUA in previous versions). Copyright© 1994 – 2000 ZyXEL Communications Corp. Prestige 202 Main Menu Getting Started Advanced Management 1.

  • Page 114: Figure 7-4 Applying Nat For Internet Access

    Prestige 202 ISDN Router Menu 4 - Internet Access Setup ISP's Name= ChangeMe Pri Phone #= 4125678 Sec Phone #= My Login= N/A My Password= N/A My WAN IP Addr= 0.0.0.0 NAT= SUA Only Address Mapping Set= 255 Telco Options:...

  • Page 115: Configuring Nat

    Prestige 202 ISDN Router Table 7-2 Applying NAT in Menus 4 and 11.3 FIELD OPTIONS DESCRIPTION Network Address Full Feature When you select this option the SMT will use Address Translation Mapping Set 1 (Menu 15.1 – see Section 7.5.1 for further details).

  • Page 116: Address Mapping Sets And Nat Server Sets

    Prestige 202 ISDN Router 7.5.1 Address Mapping Sets and NAT Server Sets: Use the Address Mapping Sets menus and submenus to create the mapping table used to assign global addresses to machines on the LAN. Each remote node must specify which NAT Address Mapping Set to use.

  • Page 117: Figure 7-8 Sua Address Mapping Rules

    Prestige 202 ISDN Router Let us look first at Option 255. Option 255 is equivalent to SUA in previous ZyXEL routers (see Section 7.2). The fields in this menu cannot be changed. Entering 255 brings up this screen. Menu 15.1.255 - Address Mapping Rules...
  • Page 118 Prestige 202 ISDN Router Start IP. Global End IP This is the ending global IP address (IGA). Type Server These are the mapping types discussed above (see Table 7-1). Type Server allows us to specify multiple servers of different types behind NAT to this machine.
  • Page 119 Prestige 202 ISDN Router Ordering Your Rules Ordering your rules is important. If there are any empty rules before your new configured rule, your configured rule will be pushed up by that number of empty rules. For example, if you have already configured rules 1 to 6 in your current set and now you configure rule number 9.

  • Page 120: Figure 7-10 Editing The First Rule In A Set

    Prestige 202 ISDN Router Selecting Edit in the Action field and then selecting a rule brings up the following menu, Menu 15.1.1.1 – Address Mapping Rule in which you can edit an individual rule and configure the Type, Local and Global Start/End IPs displayed in Menu 15.1.1.

  • Page 121: Figure 7-11 Editing The Second Rule In A Set

    Prestige 202 ISDN Router – Menu 15.1.1.1 rule2 - Rule 2 Type: Server Local IP: Start= N/A = N/A Global IP: Start= 0.0.0.0 = N/A Server Mapping Set= 1 Press ENTER to Confirm or ESC to Cancel: Press Space Bar to Toggle.

  • Page 122: Nat Server Sets

    Prestige 202 ISDN Router FIELD DESCRIPTION OPTION/EXAMPLE the Global IP Start. Note that Global IP 0.0.0.0 Start can be set to 0.0.0.0 only if the types are Many-to-One or Server. This is the ending global IP address (IGA). This field is N/A for One-to-One, Many-to- 172.16.23.55...

  • Page 123: Figure 7-12 Multiple Servers Behind Nat

    Prestige 202 ISDN Router Figure 7-12 Multiple Servers Behind NAT Configuring a Server Behind NAT Perform the following steps to configure a server behind NAT: Enter 15 in the main menu to go to Menu 15 – NAT Setup. Step 1.

  • Page 124: Figure 7-14 Menu 15.2.1 -Multiple Server Configuration

    Prestige 202 ISDN Router Enter the index number of the set you want to configure. This brings up Menu 15.2.X Step 3. where X is the index number. Step 4. Enter the service port number in the Port # field and the inside IP address of the server in the IP Address field.

  • Page 125: Examples

    Prestige 202 ISDN Router Table 7-6 Services and Port Numbers SERVICES PORT NUMBER FTP (File Transfer Protocol) Telnet SMTP (Simple Mail Transfer Protocol) DNS (Domain Name System) HTTP (Hyper Text Transfer Protocol or WWW, Web) PPTP (Point-to-Point Tunneling Protocol) 1723 Examples 7.6.1 Sample 1 –...

  • Page 126: Example 2 - Internet Access With An Inside Server

    Prestige 202 ISDN Router Menu 4 - Internet Access Setup ISP's Name= ChangeMe Pri Phone #= 4125678 Sec Phone #= My Login= N/A My Password= N/A My WAN IP Addr= 0.0.0.0 NAT= SUA Only Address Mapping Set= 255 Telco Options:...

  • Page 127: Example 3 - General Case

    Prestige 202 ISDN Router In this case, we do exactly as above (use the convenient pre-configured SUA Only set) and also go to Menu 15.2.1 to specify the Inside Server behind the NAT as shown in the next figure. Menu 15.2.1 - NAT Server Setup (Used for SUA only)
  • Page 128 Prestige 202 ISDN Router Our situation looks somewhat like this: Figure 7-19 NAT Example 3 In this case we need to configure Address Mapping Set 1 from Menu 15.1 – Address Mapping Sets. Therefore we must choose the Full Feature option from the Network Address Translation field in Menu 4 or Menu 11.3 and select an available NAT Server Set, say Server Set 2 that we can...
  • Page 129 Prestige 202 ISDN Router When finished, Menu 15.1.1 should look like as that shown in Figure 7-21. Step 6. The following figure shows how to configure the first rule. Menu 15.1.1.1 –Example3-Rule 1 Type: One-to-One Local IP: Start= 192.168.1.10 = N/A Global IP: Start= 10.132.50.1...

  • Page 130: Example 4 - Non-Nat Friendly Application Programs

    Prestige 202 ISDN Router Now we configure our IGA3 to map to our web server and mail server on the LAN. Enter 15 from the Main Menu. Step 7. Now enter 2 from this menu, enter 2 again to select Server Set 2 and configure it as Step 8.

  • Page 131: Figure 7-23 Nat Example 4

    Prestige 202 ISDN Router Figure 7-23 NAT Example 4 NOTE: Some applications still will not work through NAT even when using types One-to-One and Many-to-Many No Overload mapping types. Follow the steps outlined in example 3 above to configure these two menus as follows.

  • Page 132: Figure 7-25 Example 4 - Menu 15.1.1 - Address Mapping Rules

    Prestige 202 ISDN Router Menu 15.1.1 - Address Mapping Rules Set Name= Example4 Local Start IP Local End IP Global Start IP Global End IP Type --------------- --------------- --------------- --------------- ------ 192.168.1.10 192.168.1.12 10.132.50.1 10.132.50.3 M-M No Ov Action= Edit...

  • Page 133: Chapter 8 Advanced Phone Services

    Prestige 202 ISDN Router Chapter 8 Advanced Phone Services This chapter discusses the European and North American ISDN supplemental services. The Prestige supports a comprehensive set of advanced calling features known as Supplemental Services. European and North American ISDN Supplemental Services may vary and have different naming conventions that can be generalized as follows.

  • Page 134: Getting Started

    Prestige 202 ISDN Router Getting Started 8.1.1 Things You Need to Know Before You Start Using Supplemental Services ♦ In North America, Additional Call Offering (ACO) is required on your ISDN line in order to use the Call Waiting feature. Flexible Calling is required on your ISDN line in order to use the Three-Way-Calling or Call Transfer features.

  • Page 135: How To Use Call Waiting

    Prestige 202 ISDN Router By default call waiting is enabled on both telephone ports (except France where the default is disabled), but can be toggled on either port from Menu 2.1. 8.4.1 How to Use Call Waiting The Call Waiting feature on your ISDN line works in exactly the same way as it does on a regular analog line (which almost everyone is familiar with).

  • Page 136: Call Transfer

    Prestige 202 ISDN Router NOTE: If you wish to cancel your attempt to establish the conference call because the third party’s line is busy or if they do not answer, simply hang-up the telephone and pick it back up after it starts ringing to return to the first caller.

  • Page 137: Call Forwarding

    Prestige 202 ISDN Router ♦ Before Caller B picks up the call, you can transfer the call by pressing the flash key. The call is automatically transferred. Call Forwarding Call forwarding means the switch will ring another number at a place where you will be when someone dials your directory number.

  • Page 138: Multiple Subscriber Number (Msn)

    Prestige 202 ISDN Router Multiple Subscriber Number (MSN) In Europe you can subscribe (for a fee) more than one number for your ISDN line from your telephone company. You can then assign each number to a different port, e.g., the first number to data calls, the second to A/B adapter 1 and so on.

  • Page 139: Advanced Management

    Part III: ADVANCED MANAGEMENT Chapters 9 to 13 provide information on Prestige Filtering, SNMP, Telnet Configuration and Capabilities, System Maintenance, and Call Scheduling.

  • Page 141: Chapter 9 Filter Configuration

    Prestige 202 ISDN Router Chapter 9 Filter Configuration This chapter shows you how to create and apply filter(s). About Filtering Your Prestige uses filters to decide whether or not to allow passage of a data packet and/or to make a call. There are two types of filter applications: data filtering and call filtering. Filters are subdivided into device and protocol filters, which are discussed later.

  • Page 142: Figure 9-1 Filter Rule Process

    Prestige 202 ISDN Router Start Packet intoFilter Fetch First Filter Set Filter Set Fetch Next Fetch First Filter Set Filter Rule Fetch Next Filter Rule Next filter Next Filter Set Rule Active? Available? Available? Execute Filter Rule Check Next Rule...

  • Page 143: Configuring A Filter Set

    Prestige 202 ISDN Router Call Filtering Active Data Built-in User-defined match match match Outgoing Initiate call default Call Filters Data Packet if line not up Call Filters (if applicable) Filtering Send packet and reset Idle Timer Match Match Match Drop...

  • Page 144: Figure 9-3 Menu 21 - Filter Set Configuration

    Prestige 202 ISDN Router Menu 21 - Filter Set Configuration Filter Filter Set # Comments Set # Comments ------ ------------------ ------ ------------------ NetBIOS_WAN ______________ NetBIOS_LAN ______________ TELNET_WAN ______________ FTP_WAN ______________ ______________ ______________ ______________ ______________ Enter Filter Set Number to Configure= 0...

  • Page 145: Filter Rules Summary Menus

    Prestige 202 ISDN Router Menu 21.2 - Filter Rules Summary # A Type Filter Rules M m n - - ---- -------------------------------------------- --------- - - - 1 Y IP Pr=17, SA=0.0.0.0, SP=137, DA=0.0.0.0, DP=53 N D F Enter Filter Rule Number (1-6) to Configure: 1 Figure 9-5 Menu 21.2 –...

  • Page 146: Table 9-2 Abbreviations Used If Filter Type Is Ip

    Prestige 202 ISDN Router packet, drop the packet or check the next rule. For the latter, the next rule is independent of the rule just checked. If More is Yes, then Action Matched and Action Not Matched will be N/A.

  • Page 147: Configuring A Filter Rule

    Prestige 202 ISDN Router Refer to the next section for information on configuring the filter rules. Configuring a Filter Rule To configure a filter rule, enter its number in Menu 21.1 – Filter Rules Summary and press [Enter] to open Menu 21.1.1 for the rule.

  • Page 148: Tcp/Ip Filter Rule

    Prestige 202 ISDN Router 9.3.2 TCP/IP Filter Rule This section shows you how to configure a TCP/IP filter rule. TCP/IP rules allow you to base the rule on the fields in the IP and the upper layer protocol, e.g., UDP and TCP headers.
  • Page 149 Prestige 202 ISDN Router FIELD DESCRIPTION OPTION and 255. IP Source Route If Yes, the rule applies to packet with IP source route Yes/No option; or else the packet must not have the source route option. The majority of IP packets do not have source route.
  • Page 150 Prestige 202 ISDN Router FIELD DESCRIPTION OPTION Check Next Rule/ Action Matched Select the action for a matching packet. Forward/Drop Action Not Matched Check Next Rule/ Select the action for a packet not matching the rule. Forward/Drop Once you have completed filling in Menu 21.1.1 – TCP/IP Filter Rule, press [Enter] at the message [Press Enter to Confirm] to save your configuration, or press [Esc] to cancel.

  • Page 151: Figure 9-8 Executing An Ip Filter

    Prestige 202 ISDN Router Packet into IP Filter Filter Active? Apply SrcAddrMask to Src Addr Check Src Not Matched IP Addr Matched Apply DestAddrMask to Dest Addr Check Dest Not Matched IP Addr Matched Check Not Matched IP Protocol Matched Check Src &...

  • Page 152: Generic Filter Rule

    Prestige 202 ISDN Router 9.3.3 Generic Filter Rule This section shows you how to configure a generic filter rule. The purpose of generic rules is to allow you to filter non-IP packets. For IP, it is generally easier to use the IP rules directly.

  • Page 153: Table 9-5 Generic Filter Rule Menu Fields

    Prestige 202 ISDN Router Table 9-5 Generic Filter Rule Menu Fields FIELD DESCRIPTION OPTION Filter # This is the filter set, filter rule coordinates, i.e., 2, 3 refers to the second filter set and the third rule of that set.

  • Page 154: Applying Filters And Factory Defaults

    Prestige 202 ISDN Router Applying Filters and Factory Defaults This section shows you where to apply the filter(s) after you design it (them). Two sets of factory default filter rules have been configured in Menu 21 to prevent NetBIOS traffic from triggering calls (see Figure 9-3 Menu 21 Filter Set Configuration).

  • Page 155: Default Dial-In Filter

    Prestige 202 ISDN Router Factory Menu 11.5 - Remote Node Filter Default Input Filter Sets: Filter protocol filters= device filters= Output Filter Sets: protocol filters= device filters= Call Filter Sets: protocol filters= 1 device filters Press ENTER to Confirm or ESC to Cancel: Figure 9-11 Filtering Remote Node Traffic 9.4.3 Default Dial-in Filter...

  • Page 156: Figure 9-13 Menu 21 - Filter Set Configuration

    Prestige 202 ISDN Router 2. The source IP address: In this case, as all connections from the outside are blocked, the source IP is 0.0.0.0. 3. The destination IP address: Enter the Prestige's IP address if SUA is disabled and you have a static IP;...

  • Page 157: Figure 9-14 Menu 21.3 - Filter Rules Summary

    Prestige 202 ISDN Router Step 3 Go to Menu 21.3 – Filter Rules Summary. Menu 21.3 - Filter Rules Summary # A Type Filter Rules M m n - - ---- -------------------------------------------- --------- - - - Enter Filter Rule Number (1-6) to Configure: 1 Figure 9-14 Menu 21.3 –...

  • Page 158: Figure 9-16 Menu 21.3.2 - Tcp/Ip Filter Rule

    Prestige 202 ISDN Router Menu 21.3.2 - TCP/IP Filter Rule Filter #: 3,2 Filter Type= TCP/IP Filter Rule Active= Yes IP Protocol= 6 IP Source Route= No Destination: IP Addr= 0.0.0.0 IP Mask= 0.0.0.0 Port #= 21 Port # Comp= Equal Source: IP Addr= 0.0.0.0...

  • Page 159: Sample Telnet_Wan Filter Configuration

    Prestige 202 ISDN Router Menu 11.5 - Remote Node Filter Input Filter Sets: protocol filters= 3 device filters= Output Filter Sets: protocol filters= device filters= Call Filter Sets: protocol filters= device filters Press ENTER to Confirm or ESC to Cancel: Figure 9-18 Menu 11.5 –...
  • Page 160 Prestige 202 ISDN Router Enter 21 from the Main Menu to open Menu 21 – Filter Set Configuration. Step 1. Enter the index of the filter set you wish to configure (in this case 3) and press [Enter] Step 2.

  • Page 161: Figure 9-20 Sample Filter - Menu 21.3.1

    Prestige 202 ISDN Router Press [space bar] to choose Menu 21.3.1 - TCP/IP Filter Rule this filter rule type. The first Filter #: 3,1 filter rule type determines all Filter Type= TCP/IP Filter Rule Active= Yes subsequent filter types within a...
  • Page 162 Prestige 202 ISDN Router Menu 21.3 - Filter Rules Summary # A Type Filter Rules M m n - - ---- --------------------------------------------------------------- - - - 1 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=23 N D F Enter Filter Rule Number (1-6) to Configure: 1...

  • Page 163: Figure 10-1 Menu 22 - Snmp Configuration

    Prestige 202 ISDN Router Chapter 10 SNMP (Simple Network Management Protocol) This chapter takes you through SNMP Configuration Menu 22. The SNMP is a protocol governing network management and the monitoring of network devices and their functions. The Prestige supports the utilization of SNMP to regulate the communication that occurs between the manager station and the agent stations in a network.

  • Page 164: Table 10-1 Fields In Menu 22 (Snmp Configuration)

    Prestige 202 ISDN Router 2. You are prompted to enter the following information. The parameters you have to fill in are indicated in bold type. Table 10-1 Fields in Menu 22 (SNMP Configuration) FIELD DESCRIPTION EXAMPLES Get Community Public (default) You can determine what the Get Community is for your Prestige.

  • Page 165: Chapter 11 Telnet Configuration And Capabilities

    Prestige 202 ISDN Router Chapter 11 Telnet Configuration and Capabilities This chapter discusses using telnet to remotely configure your Prestige 11.1 About Telnet Configuration Before the Prestige is properly setup for TCP/IP, the only option for configuring it is through the console port.

  • Page 166: Telnet Under Nat

    Prestige 202 ISDN Router 11.2 Telnet Under NAT When NAT is enabled and an inside server is specified, telnet connections from the outside will be forwarded to the inside server. So to configure the Prestige via telnet from the outside, you must first telnet to the inside server, and then telnet from the server to the Prestige using its inside LAN IP address.

  • Page 167: Chapter 12 System Maintenance

    Prestige 202 ISDN Router Chapter 12 System Maintenance This chapter covers the diagnostic tools that help you to maintain your Prestige. These tools include updates on system status, port status, log and trace capabilities and upgrades for the system software. This chapter describes how to use these tools in detail.

  • Page 168: System Status

    Prestige 202 ISDN Router 12.1 System Status The first selection, System Status gives you information on the status and statistics of the ports, as shown below. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you information on your ISDN telephone line status, number of packets sent and number of packets received.

  • Page 169: Table 12-1 System Maintenance - Status Menu Fields

    Prestige 202 ISDN Router Table 12-1 System Maintenance Status Menu Fields – FIELD DESCRIPTION Chan Shows statistics for B1 and B2 channels respectively. This is the information displayed for each channel. Link Shows the name of the remote node or the user the channel is currently connected to or the status of the channel (e.g., Down, Idle, Calling, Answering,...

  • Page 170: System Information

    Prestige 202 ISDN Router LAN Packet Which Triggered Last Call: (Type IP) 45 00 00 3C 02 12 00 00 3B 01 36 49 00 00 00 00 C0 44 87 22 08 00 62 2B 20 04 00 00 00 08 A9 D0 C0 44 87 22 00 01 02 03 04 05 06 07 08 09 0A 0B...

  • Page 171: Console Port Speed

    Refers to the routing protocol used. ZyNOS F/W Version Refers to the version of the ZyNOS Network Operating System firmware. ZyNOS is a registered trademark of ZyXEL Communications Corp. Country Code Refers to the one byte country code value (in decimal notation).

  • Page 172: Viewing Error Log

    Prestige 202 ISDN Router 12.2.1 Viewing Error Log The first place you should look for clues when something goes wrong is the error log. Follow the procedures to view the local error/trace log: Enter 24 from the Main Menu to open Menu 24 – System Maintenance.

  • Page 173: Table 12-3 System Maintenance Menu Syslog Parameters

    Prestige 202 ISDN Router You need to configure the UNIX syslog parameters described in the following table to activate syslog then choose what you want to log. Table 12-3 System Maintenance Menu Syslog Parameters PARAMETER DESCRIPTION UNIX Syslog: Active Use [space bar] to turn on or off syslog.

  • Page 174: Packet Triggered

    L02 Call Terminated C02 Call Terminated Jul 19 11:19:27 192.168.102.2 ZyXEL Communications Corp.: board 0 line 0 channel 0, call 1, C01 Outgoing Call dev=2 ch=0 40002 Jul 19 11:19:32 192.168.102.2 ZyXEL Communications Corp.: board 0 line 0 channel 0, call 1, C02 OutCall Connected 64000 40002 Jul 19 11:20:06 192.168.102.2 ZyXEL Communications Corp.: board 0 line 0 channel 0, call...

  • Page 175: Diagnostic

    Remote Call = a string type which represents as the remote call number Local Call = a string type which represents as the my (local) call number Jul 19 12:08:25 192.168.102.2 ZyXEL Communications Corp.: Call Connect: Dir=2 Remote Call=40002 Local Call=1 Jul 19 12:08:29 192.168.102.2 ZyXEL Communications Corp.: Call Disconnect: Dir=2 Remote...

  • Page 176: Figure 12-8 Menu 24.4 - System Maintenance - Diagnostic

    Prestige 202 ISDN Router Menu 24.4 - System Maintenance - Diagnostic ISDN System Hang Up B1 Call 21. Reboot System Hang Up B2 Call 22. Command Mode Reset ISDN ISDN Connection Test Manual Call TCP/IP 11. Internet Setup Test 12. Ping Host...

  • Page 177: Figure 12-9 Display For A Successful Manual Call

    Prestige 202 ISDN Router screen displays what is happening during the call setup and protocol negotiation. The following is an example of a successful connection. Internet Setup Test This test checks to see if your Internet access configuration has been done correctly.

  • Page 178: Filename Conventions

    Prestige 202 ISDN Router This figure shows an example where authentication failed. Start dialing for node <1> ### Hit any key to continue. ### Dialing chan<2> phone<last 9-digit>:23456 Call CONNECT speed<64000> chan<2> prot<1> LCP up CHAP send response ***Login to remote failed. Check name/passwd.

  • Page 179: Backup Configuration

    Prestige 202 ISDN Router Table 12-5 Filename Conventions FILE TYPE INTERNAL EXTERNAL DESCRIPTION NAME NAME COMMAND Configuration Rom-0 *.rom This is the router configuration filename ATLC File on the Prestige. Uploading the rom-0 file replaces the entire ROM file system,...

  • Page 180: Restore Configuration

    Prestige 202 ISDN Router Step 1. Click “Transfer”, then “Receive File” to display the following screen. Enter where you want to place the rom configuration file on your computer. Choose the XMODEM Protocol. Figure 12-12 HyperTerminal Screen Step 2. Enter a path and name for the rom configuration file on your computer and make sure you choose the XMODEM Protocol.

  • Page 181: Figure 12-15 Hyperterminal Screen

    Prestige 202 ISDN Router Press “Y” to indicate that you want to continue. Step 2. The following procedure is for the HyperTerminal program. The procedure for other serial communications programs should be similar. Run the HyperTerminal program. Click “Transfer”, then “Send File” to display the following screen.

  • Page 182: Upload Firmware

    Prestige 202 ISDN Router 12.7 Upload Firmware Menu 24.7 – System Maintenance – Upload Firmware allows you to upgrade the firmware and the configuration file via the console port. The firmware and configuration file may also be uploaded via FTP. There are 2 components in the system: the router firmware and the configuration file, as shown in the next figure.

  • Page 183: Uploading Router Configuration File

    Prestige 202 ISDN Router Menu 24.7.1 - System Maintenance - Upload Router Firmware To upload router firmware: 1. Enter "y" at the prompt below to go into debug mode. 2. Enter "atur" after "Enter Debug Mode" message. 3. Wait for "Starting XMODEM upload" message before activating XMODEM upload on your terminal.

  • Page 184: Tftp Transfer

    Prestige 202 ISDN Router Menu 24.7.2 - System Maintenance - Upload Router Configuration File To upload router configuration file: 1. Enter "y" at the prompt below to go into debug mode. 2. Enter "atlc" after "Enter Debug Mode" message. 3. Wait for "Starting XMODEM upload" message before activating XMODEM upload on your terminal.

  • Page 185: Using The Ftp Command From The Dos Prompt

    Prestige 202 ISDN Router Step 4. Launch TFTP client on your workstation and connect to the Prestige. Set the transfer mode to binary before starting data transfer. Step 5. Use the TFTP client to transfer files between the Prestige and the workstation.

  • Page 186: Figure 12-20 Sample Ftp Session

    Prestige 202 ISDN Router Step 7. Type quit to exit the ftp prompt. Connected to 202.x.x.x 220 P202 FTP version 1.0 ready at Thu Jan 8 18:00:02 2000 User (202.x.x.x:(none)): <Enter> 331 Enter PASS command Password: 230 Logged in ftp> bin 200 Type I OK ftp>...

  • Page 187: Boot Module Commands

    Prestige 202 ISDN Router The following is a sample tftp command: TFTP [-i] host put p202.bin ras where “i” specifies binary image transfer mode (use this mode when transferring binary files), “host” is the Prestige IP address, “put” transfers the file source on the workstation (p202.bin –...

  • Page 188: Command Interpreter Mode

    [help] at the command prompt. For more detailed information, check the ZyXEL web site or send e-mail to the ZyXEL Support Group. Enter Menu Selection Number: 8 Copyright (c) 1994 - 2000 ZyXEL Communications Corp. ras> ? Valid commands are:...

  • Page 189: Call Control

    Prestige 202 ISDN Router 12.9 Call Control The Prestige provides four call control functions: call control parameters, blacklist, budget management and call history. Call control parameters allows you to set a dial out time limit, the number of times a number should be called before it is added to the blacklist and the interim between calls.

  • Page 190: Call Control Parameters

    Prestige 202 ISDN Router 12.9.1 Call Control Parameters Menu 24.9.1 - Call Control Parameters Dialer Timeout: Digital Call(sec)= 60 Retry Counter= 0 Retry Interval(sec)= N/A Press ENTER to confirm or ESC to Cancel: Please enter a number from 5 to 300...

  • Page 191: Budget Management

    Prestige 202 ISDN Router Menu 24.9.2 shows a blank list of telephone numbers that have been blacklisted. Menu 24.9.2 - Blacklist Phone Number Remove Selection (1-14): Figure 12-25 Menu 24.9.2 – Blacklist 12.9.3 Budget Management Menu 24.9.3 shows the budget management statistics for outgoing calls.

  • Page 192: Call History

    Prestige 202 ISDN Router The total budget is the time limit on the accumulated time for outgoing call to a remote node or for calling back to the dial-in users collectively. When this limit is reached, the call will be dropped and further outgoing calls to that remote node or dial-in user (callback) will be blocked.

  • Page 193: Time And Date Setting

    Prestige 202 ISDN Router This is the length of time of the longest telephone call. This is the length of time of the shortest telephone call. Total This is the total length of time of all the telephone calls to/from that telephone number.
  • Page 194 Prestige 202 ISDN Router Table 12-9 Time and Date Setting Fields FIELD DESCRIPTION Use Time Server when Enter the time service protocol that your time server will send when the Bootup Prestige powers up. Choices are Daytime (RFC-867), Time (RFC-868), NTP (RFC-1305) and None.

  • Page 195: Chapter 13 Call Scheduling

    (record the program you want in a specified time). You can apply up to 4 schedule sets in Menu 11.1 – Remote Node Profile. You configure each schedule in Menu 26 – Schedule Setup. Copyright (c) 1994 – 2000 ZyXEL Communications Corp. Prestige 202 Main Menu...

  • Page 196: Figure 13-3 Schedule Set Setup

    Prestige 202 ISDN Router As we can have multiple sets that are applied in turn, lowered numbered sets take precedence over higher numbered sets in case of conflict. For example, if we apply sets 1, 2, 3, 4 in a remote node, then set 1 will take precedence over set 2, 3 and 4 as it is applied first.

  • Page 197: Applying A Schedule Set

    Prestige 202 ISDN Router Once the connection is dropped manually or it times out, then that remote node cannot be triggered up until the end of the Duration. Table 13-1 Schedule Set Setup Fields FIELD DESCRIPTION OPTION Active Yes/No Press [space bar] to toggle between Yes and No. Choose Yes and press [Enter] to activate the set.

  • Page 198: Figure 13-4 Applying Schedule Set(S) To A Remote Node

    Prestige 202 ISDN Router Menu 11.1 - Remote Node Profile Rem Node Name= ? Edit PPP Options= No Active= Yes Rem IP Addr= ? Call Direction= Both Edit IP= No Incoming: Telco Option: Rem Login= ? Transfer Type= 64K Rem Password= ?

  • Page 199: Chapter 14 Troubleshooting

    Part IV: TROUBLESHOOTING Chapter 14 provides information about solving common problems, some Appendices, Acronyms and Abbreviations, as well as an Index.

  • Page 201: Problems Starting Up The Prestige

    Prestige 202 ISDN Router Chapter 14 Troubleshooting This chapter covers the potential problems you may run into and the possible remedies. After each problem description, some instructions are provided to help you diagnose and solve it. 14.1 Problems Starting Up the Prestige...

  • Page 202: Problems With The Isdn Line

    Prestige 202 ISDN Router 14.2 Problems With the ISDN Line Table 14-2 Troubleshooting the ISDN Line PROBLEM CORRECTIVE ACTION The ISDN initialization failed. Check the error log (in Menu 24.3.1), you should see a log entry for the This problem occurs when you ISDN initialization failure in the format, ‘ISDN init failed.

  • Page 203: Problems With The Lan Interface

    Prestige 202 ISDN Router 14.3 Problems With the LAN Interface Table 14-3 Troubleshooting the LAN Interface PROBLEM CORRECTIVE ACTION Cannot ping any station on the Check the Ethernet LEDs on the front panel. The LED should be on LAN. for a port that has a station connected. If it is off, check the cables between your Prestige and the station.

  • Page 204: Problems For Remote User To Dial-In

    Prestige 202 ISDN Router 14.5 Problems for Remote User to Dial-in Table 14-5 Troubleshooting for Remote Users to Dial-in PROBLEM CORRECTIVE ACTION A remote user cannot dial-in. First verify that you have configured the authentication parameters in Menu 13. These would be CLID Authen and Recv. Authen.

  • Page 205: Appendix A Acronyms And Abbreviations

    Prestige 202 ISDN Router Appendix A Acronyms and Abbreviations Attachment Unit Interface BAP/BACP Bandwidth Allocation Protocol/Bandwidth Allocation Control Protocol Bandwidth on Demand Call Detail Record CHAP Challenge Handshake Authentication Protocol CLID Calling Line Identification CSU/DSU Channel Service Unit/Data Service Unit...
  • Page 206 Prestige 202 ISDN Router Network Address Translation Password Authentication Protocol POTS Plain Old Telephone Service Point to Point Protocol PSTN Public Switched Telephone Network Request For Comment Routing Information Protocol (IPX) Service Advertising Protocol SNMP Simple Network Management Protocol SPID...

  • Page 207: Appendix B Enhanced Syslog

    Prestige 202 ISDN Router Appendix B Enhanced Syslog The following are the message formats that Syslog sends to the server. SdcmdSyslogSend ( SYSLOG_CDR, SYSLOG_INFO, String); String = board xx line xx channel xx, call xx, str board = the hardware board ID...
  • Page 208 Prestige 202 ISDN Router Appendix C Power Adapter Specifications AC POWER ADAPTER SPECIFICATIONS North America AC Power Adapter model: AD48-1201200DUY Input power: AC 120Volts/60Hz/0.25A Output power: DC 12Volts/1.2A Power consumption: 11W Plug: North American standards Safety standards: UL; CUL (UL 1950, CSA C22.2 No.234-M90)
  • Page 209 CLID Callback Support, 1-3 Average Line Utilization, 12-3 COM port, 2-3 Common ISDN Application Program Interface, 2-17 Compatibility, 1-4 Compression, 4-9, 6-4 Connect your Prestige 202, 2-3 Backup Configuration, 12-11 Console Port, 2-3 BACP, 4-6 Country Code, 12-5 Bandwidth-On-Demand, 1-3...
  • Page 210 Prestige 202 ISDN Router DNS. See Domain Name System Firmware Upgrade, 1-4 Domain Name, 7-17 Flash Key, 8-2 Domain Name System, 3-4 Front Panel, 2-1 DOVBS. See Data Over Voice Bearer Service FTP Client, 12-17 DSS1, 2-11, 2-15 FTP Client Software, 12-18...
  • Page 211 Prestige 202 ISDN Router IP Mapping, 7-3 Application, 7-4 IP network number, 3-1 Applying NAT in the SMT Menus, 7-5 IP Pool, 3-3, 3-6, 6-5 Configuring, 7-7 IP Static Route, 5-6 Examples, 7-17 IP Static Route Setup, 5-7 How NAT Works, 7-2...
  • Page 212 Prestige 202 ISDN Router PPP Multilink, 1-3 SMT Interface Summary, 2-7 Prestige Network Commander, 1-4 SNMP, 1-1 Private, 5-5, 5-8 10-1 SNMP Configuration, SPID, xx, 2-11 Stac data compression, 1-4 Static Route Setup, 5-6 Rear Panel, 2-2 Static Routing Topology, 5-6 Relay, 3-6 SUA (Single User Account).
  • Page 213 Prestige 202 ISDN Router TCP/IP Setup, 3-7 Starting Up the Prestige, 14-1 Telco Options, 3-13 Trusted Host, 10-2 Telecommuting, 6-1, 6-2 Telnet, 11-1 Single Administrator, 11-2 Terminal Mode, 12-17 UNIX Syslog, 12-7 Terminal Portability, 8-6 Upload Firmware, 12-13 Three Way Calling, 8-3...

Table of Contents