ZyXEL Communications Prestige 202 User Manual page 100

Prestige 202 ISDN Router
FIELD
Inactive users are displayed with a [
name in Menu 14.
Password Enter the password for the remote dial-in user.
Callback This field determines if your Prestige will allow call back to this user upon
dial-in. If this option is enabled, your Prestige will call back to the user if
requested. In such a case, your Prestige will disconnect the initial call from
this user and dial back to the specified callback number (see ahead).
l
No
l
Optional
l
Mandatory
Phone # This option allows the user to specify the call back telephone number on a
Supplied call-by-call basis. This is useful when your Prestige returns a call back to a
by Caller mobile user at different numbers, e.g., a sales rep. in a hotel.
l
If the setting is Yes, the user can specify and send to the Prestige the
callback number of his/her choice.
l
The default is No, i.e., your Prestige always calls back to the fixed
callback number.
Callback If Phone # Supplied by Caller is No, then this is a required field. Otherwise,
Phone # a N/A will appear in the field. Enter the telephone number to which your
Prestige will call back.
Rem CLID If you enable CLID Authen field in Menu 13, then you need to specify the
telephone number from which this user calls. Your Prestige will check the
CLID in the incoming call against the CLIDs in the database. If they do not
match and CLID Authen is Required, your Prestige will not answer the call.
Idle Time- Enter the idle time (in seconds). This time-out determines how long the dial-in
user can be idle before your Prestige disconnects the call when the Prestige
out
is calling back.
Idle time is defined as the period of time where there is no data traffic
between the dial-in user and your Prestige. The default is 300 seconds (5
minutes).
Once you have completed filling in Menu 14.1
ENTER to Confirm ... ] to save your configuration, or press [Esc] at any time to cancel.
6-8
DESCRIPTION
–
The default is no callback.
–
The user can choose to disable callback.
–
The user cannot disable callback.
–
] (minus sign) at the beginning of the
–
Edit Dial-in User, press [Enter] at the message [Press
OPTION
Yes/No
No (default)
Optional
Mandatory
No (default)
300 seconds
(default)
Dial-in Server Configuration
Yes