Lan-To-Lan Server Application; Figure 6-1 Example Of Telecommuting; Figure 6-2 Example Of A Lan-To-Lan Server Application - ZyXEL Communications Prestige 202 User Manual

Prestige 202 ISDN Router

Figure 6-1 Example of Telecommuting

6.2

LAN-to-LAN Server Application

Your Prestige can also be used as a dial-in server for LAN-to-LAN application to provide access
for the workstations on a remote network. For your Prestige to be set up as a LAN-to-LAN server,
you need to configure the Default Dial-in User Setup to set the operational parameters for incoming
calls. Additionally, you must create a remote node for the router on the remote network (see
Chapter 4 – Remote Node Configuration). An example of your Prestige being used as a LAN-
to-LAN server is shown as follows.

Figure 6-2 Example of a LAN-to-LAN Server Application

6-2
Dial-in Server Configuration