ZyXEL Communications Prestige 202 User Manual page 78

Prestige 202 ISDN Router
FIELD
Incoming: Call Back
Outgoing: My Login
Outgoing: My
Password
Outgoing: Authen
Outgoing:
Pri(mary)
Sec(ondary)
Phone #
Edit PPP Options
4-4
DESCRIPTION
the call will be dropped.
This field is applicable only if Call Direction is set to
Both. Otherwise, a N/A appears in the field.
This field determines whether or not your Prestige will
call back after receiving a call from this remote node.
If this option is enabled, your Prestige will disconnect
the initial call from this node and call it back at the
Outgoing Primary Phone Number (see ahead).
This is a required field [?] if Call Direction is either
Both or Outgoing. Enter the login name for your
Prestige when it calls this remote node.
This is a required field [?] if Call Direction is either
Both or Outgoing. Enter the password for your Prestige
when it calls this remote node.
This field sets the authentication protocol used for
outgoing calls. Options for this field are:
l
CHAP/PAP – Your Prestige will accept either
CHAP or PAP when requested by this remote
node.
l
CHAP – accept CHAP only.
l
PAP – accept PAP only.
Your Prestige always calls this remote node using the
Primary Phone number first for a dial-up line.
If the Primary Phone number is busy or does not
answer, your Prestige will dial the Secondary Phone
number if available.
Some areas require dialing the pound sign # before the
phone number for local calls. A # symbol may be
included at the beginning of the phone numbers as
required.
To edit the PPP options for this remote node, move the
cursor to this field. Use [space bar] to select Yes and
press [Enter]. This will bring you to Menu 11.2
Node PPP Options. For more information on configuring
PPP options, see the section Editing PPP Options.
OPTIONS
Yes/No
CHAP/PAP
CHAP
PAP
Press [space
bar] to toggle
Yes then press
–
Remote
[Enter]
Remote Node Configuration