3
Startup
3.1
Unpacking the Box
Before unpacking the telephone, check the box to see if there is any visible damage caused
during transport. Then open the box and check its contents to make sure they are complete
and undamaged.
3.2
Setting Up the Telephone
Due to the many different kinds of varnishes and polishes used on furniture, the possibility of
housing components being damaged or leaving unsightly marks cannot be completely ruled
out. Siemens does not assume any liability for any damage associated with where the tele-
phone set is mounted.
When setting up the telephones, make sure that they are not exposed to direct sunlight and are
not in the direct vicinity of a heat source.
3.3
Keypad and Control Panel
Numeric/dialing keys
Plus/minus keys
Label
(covered by handset)
Figure 3-1
Keypad and control panel (optiPoint 500 standard)
P31003-E8400-A100-3-7620
Service Manual
Unpacking the Box
Labeling space
Function/name
keys with LED
Dialog keys
Startup
3-1