Diagnostics; Fault Trace Configuration - Siemens HiPath 8000 Administrator's Manual

3.15

Diagnostics

3.15.1

Fault Trace Configuration

For the various services and applications available on the OpenStage 60/80, error tracing and
logging can be activated. The resulting files can be downloaded via the WBM.
The File size (bytes) parameter sets the maximum file size. When the maximum size is
reached, the file is deleted, and a new trace file is generated. The trace data is then written to
the new file.
The Trace timeout determines when to stop tracing, i. e. writing to the trace file.
If Automatic clear before start is checked, the existing trace file will be deleted on pressing
the Submit button, and a new, empty trace file will be generated.
The following trace levels can be selected:
• OFF: Only errors messages are stored.
• DEBUG: All messages are stored.
Brief Descriptions of the Components
• Administration
This deals with the changing and setting of parameters within the phone database, from
both the User and Admin menus.
• Application Menu
This is where applications to be run on the phone can be started and stopped.
• Call log
This deals with the Call log application which displays the call history of the phone.
• Certificate management
This service handles the verification and exchange of certificates for security and verifica-
tion purposes.
• Component registrar
This handles data relating to the type of phone e.g HFA/SIP Workpoint Hi/Workpoint Lo.
• Data Access service
This service allows other services to access the data held within the phone database.
• Digit Analysis service
This analyses and modifies digit streams which are sent and received by the phone e.g.
canonical conversion.
• Directory service
This performs a look up service for data in the phonebook, trying to match incoming and
outgoing numbers with entries in the phonebook.
• Health service
A31003-01010-M11-1-7619, 29/01/2007
HiPath 8000 - OpenStage 60/80, Administrator Manual
administration.fm
Administration
Diagnostics
3-91