Led Expected Behavior On Power Up; Turn The Projector Off - Christie D4K3560 Setup Manual

LED expected behavior on power up

The following table shows the expected behavior of the projector LED and the MCPU board power
LED on power up:
Action/Event
Applying AC power to the projector head
Within the first second
At approximately 30 seconds
At approximately 50 seconds
At approximately one minute and 15 seconds, the TPC indicates that it is connected and shows the
home page.

Turn the projector off

1. On the touch panel controller, tap the Home tab.
2. Tap Power.
When powering off in preparation for inspection or maintenance, always disconnect from AC,
i
set the projector breaker and lamp power supply breakers to the off positions.
D4K3560 Setup Guide
020-101161-05 Rev. 1 (06-2015)
Projector LEDs
Solid red
Solid green
Solid yellow
Solid red
Solid green
Solid yellow
Off red
Blinking yellow
Blinking green
Off/blinking red
Solid yellow
Off green
Operation
MCPU Board Power LED
Yellow
Blinking green
Blinking green
Solid green
35