8.2 Fuse Replacement
If FUSE -G- flashes on the display, the fuse must be replaced, taking all the neces-
sary precautions when opening up the instrument.
Only use the type of fuse shown on label inside the unit's cover:
0.1A - Fast Acting - 380V, 5x20mm, 10kA
8.3 Cleaning
Use a soft cloth lightly dampened with soapy water. Rinse with a wet cloth and then
dry with a dry cloth. Do not use alcohol, solvents or hydrocarbons.
8.4 Storage
If the instrument is not used for an extended period of time, it is recommended to
charge the instrument every two or three months.
Megohmmeter Models 5050/5060
0.561.8187
Make sure that none of the terminals are connected and that the selector
switch is set to OFF before opening up the case.
Disconnect the instrument from any source of electricity.
www.
.com
information@itm.
55