Average Battery Life: The operating time will be 15 days or 3 weeks, based upon a
10 minute long PI measurement.
Recharge Time:
6 hours for 100% capacity (10 hours if the battery is completely drained)
0.5 hours for 10% capacity (charge life: 2 days approximately)
3.5 Environmental Specifications
Operating Range:
14° to 104°F (-10° to 40°C) during recharging of batteries
14° to 131°F (-10° to 55°C) during measurement
10 to 80% RH
Storage: -40 to 158°F (-40 to 70°C); 10 to 90% RH
Altitude: <2000m
3.6 Mechanical Specifications
Case Dimensions:
10.63 x 9.84 x 7.09" (270 x 250 x 180mm)
Weight: 9.5 lbs (4.3kg) approx.
Mechanical Protection
IP 53 per NF EN 60529 (Ed. 92)
IK 04 per NF EN 50102 (Ed. 95)
3.7 Safety Specifications
Electrical safety according to EN 61010-1 (Ed. 2 for 2001),
EN 61557 (ed. 97)
1000V CAT III, Pollution Degree 2
2500V CAT I
Electromagnetic Compatibility:
NF EN 61326-1 (Ed. 97) + A1, industrial environment category
Megohmmeter Models 5050/5060
0.561.8187
NOTE: It is possible to recharge the batteries while performing insulation mea-
surements provided that the values measured are higher than 20MΩ. In this
case, the recharging time is higher than 6 hours and depends on the frequency
of the measurements.
www.
.com
information@itm.
29