Table of Contents
Advertisement
•
•
Model 5060 only:
•
•
•
•
2.2 Digital Features
Main Display
Indicates the value of:
• Insulation measurement (resistance, DAR and PI, DD, capacitance).
Small Display
Indicates:
• Voltage measured or applied by the instrument.
• Elapsed time or the output voltage, during insulation measurement.
After recording a set of data (5060), the small display also indicates the time and
date in MR (memory recall) mode, and the memory address with the OBJ : TEST
number.
Megohmmeter Models 5050/5060
0.561.8187
- Increases the flashing parameter being displayed. To move about the
list of interval insulation measurements, in the R(t) function.
- Decreases the flashing parameter being displayed. To move about
the list of interval insulation measurements in the R(t) function.
If the and buttons are held down, the movement between param-
eters is increased to a faster rate.
MEM - Saves measured values
MR - Recalls saved data
PRINT - Prints measurement results
PRINT MEM - Prints memory contents
MEM MR
PI
2
nd
DARDD
ALARM
www.
min sec
COM
V
OBJ.
TEST
P
SMOOTH REMOTE
.com
DC
AC
GΩ
TΩ
MΩ kΩ
µA nA µF
information@itm.
9
Advertisement
Table of Contents
