7.1 Installing DataView
DO NOT CONNECT THE INSTRUMENT TO THE PC BEFORE INSTALLING THE
SOFTWARE AND DRIVERS.
NOTE: When installing, the user must have Administrative access rights
during the installation. The users access rights can be changed after the
installation is complete.
DataView
USB Flash Drive Install
1. Insert the USB stick into an available USB port (wait for driver to be installed).
2. If Autorun is enabled then an AutoPlay window should appear as shown.
42
0.561.8187
DATAVIEW
®
must be reinstalled for each user in a multi-user system.
®
www.
CHAPTER 7
SOFTWARE
®
.com
Megohmmeter Models 5050/5060
information@itm.