Set-Up Function - AEMC 5050 User Manual

First Function 
• Press button briefly to increase the displayed number slowly.
• Press button for a longer time to increase at a faster rate.
Second Function 
• Press button briefly to decrease the displayed number slowly.
• Press button for a longer time to decrease at a faster rate.
Unlike all the second functions of other buttons, it is not necessary to press the
button each time to get to the  function. The
and is valid for the  function (only), as long as the user does not deactivate it by
pressing
2.5.7

SET-UP Function

Configures the instrument.
After selecting SET-UP with the rotary selector switch:
• All the display segments are lit up for 1 second.
• The software version number is then displayed.
• The instrument ID number is displayed next.
• "PUSH" appears on the small display and "btn" on the main display,
prompting the operator to press a button.
The SET-UP function is used to directly access the parameters to be pro-
grammed, by pressing the corresponding button.
• After having pressed a button, the corresponding figures or symbols
appear on the screen.
• The figures or the symbols that can be modified, flash on the screen.
• Use the
• All the parameters are immediately and permanently saved.
18
0.561.8187
or another button.
and buttons.
www.
symbol remains displayed
Megohmmeter Models 5050/5060
.com
information@itm.