2.6.7 SET-UP Function
Configures the instrument.
After selecting SET-UP with the rotary selector switch:
■ All the display segments are lit up for 1 second.
■ Then, the software version number is displayed.
■ Next, the instrument ID number is displayed.
■ "PUSH" will appear on the small display and "btn" on the main display, which
prompts the operator to press a button.
The SET-UP function is used to directly access the parameters to be
programmed, by pressing the corresponding button.
■ After a button is pressed, the corresponding figures or symbols will appear on
the screen.
■ The figures or the symbols that can be modified will flash on the screen.
■ Use the
and
■ All parameters are immediately and permanently saved.
Megohmmeter Models 5050 & 5060
buttons.
21