Wireless Xdp Parallel Mode - Panasonic KX-TDA100 Features Manual

1.24.5 Wireless XDP Parallel Mode

Description
A PS can be used in parallel with a wired telephone (PT/SLT). In this case, the wired telephone
is the main telephone and the PS is the sub telephone. When Wireless XDP Parallel Mode is
enabled, the two telephones share one extension number (main telephone's extension
number) like XDP Parallel mode for a DPT and an SLT.
Conditions
• If one of the telephones goes off-hook while the other telephone is on a call, the call is
switched to the telephone going off-hook. However, the call is not switched in one of the
following conditions:
a)
During a Conference call (
b)
While Live Call Screening (LCS) or Two-way Record is activated (
DPT (Digital) Integration).
c)
While receiving OHCA (
d)
While being monitored by another extension (
e)
During Consultation Hold.
f)
During a broadcasting call (
TDA200 only)).
(Consultation Hold: Allows an extension user to place a call on hold temporarily to
perform Call Transfer, Conference, or Call Splitting.)
• Wireless XDP Parallel Mode can only be set from a PS. The wired telephone can accept
or deny this feature through COS programming (
Telephone [515]). Once this feature is set, the setting at the wired telephone cannot be
changed unless a PS changes the setting.
PBX
Super
Hybrid
Port
XDP Parallel Mode
Wireless Phone
DPT
Extn. 102
1.7.4.3 Off-hook Call Announcement (OHCA)).
1.24 Portable Station (PS) Features
Wireless XDP
Parallel Mode
PT/SLT
1.13.1 Conference Features).
1.7.3 Call Monitor).
1.15.1 Broadcasting (KX-TDA30/KX-TDA100/KX-
Wireless XDP Parallel Mode for Paired
Cell Station
PS
Extn. 103
1.23.3 Voice Mail
Feature Guide 227