Panasonic KX-TDA100 Features Manual page 212

1.23 Voice Mail Features
[Performance of Pressing the MESSAGE Button]
[Example]
Pressing the
MESSAGE
button
4.
AA Service
If the VPS transfers the call using the AA service, the PBX will inform the VPS of the status
of the called destination with the preprogrammed DTMF status signal so that the VPS can
confirm the status of the extension without listening to the system tones (e.g., ringback
tone).
Assign the DTMF status signal to suit the VPS settings.
[The DTMF Status Signal and Condition]
RBT (ringback
tone)
BT (busy tone)
ROT (reorder tone) The dialled number is invalid.
DND (DND tone)
Answer
FWD VM RBT
(FWD to Voice Mail
ringback tone)
FWD VM BT (FWD
to Voice Mail busy
tone)
212 Feature Guide
Transmitted Command
In AA Service Mode
Switching to VM command +
Listening message command
(#6 + H [H = Mailbox No.])
PBX
Extn. 102
Status
The PBX is ringing the corresponding
extension.
The called extension is busy.
The called extension has set DND. (
1.3.1.3 Do Not Disturb (DND))
The called extension has answered the
call.
The called extension has set FWD to
VPS and the PBX is calling another port
of the VPS.
The called extension has set FWD to
VPS and all ports of the VPS are busy.
In VM Service Mode
Listening message command
( H [H = Mailbox No.])
Sent "#6" + " ", "102".
Switching to VM command
VPS (In AA
service mode)
Mailbox for
Extn. 102
Condition
Listening message
command, mailbox number
Default Command
1
2
3
4
5
6
7